Sinuo Testing Equipment Co. , Limited |
Verified Suppliers
|
|
1m Electric Vehicle Parts EMC Testing System Anechoic Chamber
Complied Standards & Clauses
EN 55025 "Vehicles, boats and internal combustion engines- Radio disturbance characteristics-Limits and methods of measurement for the protection of on-board receivers"
CISPR 25 "Vehicle, boats and internal combustion engines-Radio disturbance characteristics-Limits and methods of measurement for the protection of on-board receivers"
DIN / ISO 11452 "Road vehicles-Component test methods for electrical disturbances from narrowband radiated electromagnetic energy-Part 1: General principles and terminology"
......
Equipment Overview
This EMC test chamber is specifically designed for radiation
emission and radiated immunity tests of automotive components and
meet the requirements of DIN / ISO 11452-2 and EN 55025 (CISPR 25).
Inside the darkroom, a ferrite absorbing material is installed, and
a composite absorbing material is installed at a height of
approximately the center of the darkroom. The standard test
frequency range is at least between 30MHz and 18GHz. To ensure
electrical connection between the ground plane of the test table
and the shield, some conductive tape with beryllium copper spring
was installed between the absorbing materials.
Technical Parameters
Dimensions (length*width * height) | 6.4m x 5.5m x 3.6m |
Frequency Range | 30MHz ~ 18GHz (optional to 40GHz) |
Test Distance | 1m |
Radiation Emission Test | Complies with EN 55025 / CISPR 25 requirements |
Radiated Immunity Test | In accordance with DIN / ISO 11452 |
Schematic Diagram |