|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC 61851 Electric Vehicle Supply Equipment EVSE Mechanical
Strength Impact Test Equipment
Complied Standards & Clauses
This mechanical strength inpact test equipment complied to IEC
61851-1 2017 clause 12.11 standards.
Technical Parameters
| Control and operation | PLC control, 7-inch color touch screen control, remote control remote control. |
| Drive mode | Motor + reducer mechanism |
| Pendulum impact | |
| Impact force | Standard 5J (10J, 20J, 50J optional) |
| Pendulum mass accuracy | ±1% |
| Equivalent mass of impact hammer | 1.7kg (5 kg, 5 kg, 10 kg are optional) |
| Impact hammer form | Spherical impact hammer |
| Pendulum striking point height adjustment range: | Customized according to the sample |
| Pedulum arm height adjustment range | 200-500mm |
| Specimen clamping adjustment range | Customized according to the sample |
| Impact point height adjustment | Electric adjustable |
| Number of impacts | 0-9999 times can be preset |
| Status indication | LED indicator |
| Pendulum height (energy) adjustment | Manual adjustment |
| Pendulum positioning | Electromagnet adsorption |
| Pendulum release | Wireless remote control or touch screen operation |
| Impact point height adjustment method | Wireless remote control or touch screen operation |
| Security | 360° all-round safety protection, automatic electric brake to prevent secondary impact |
| Vertical impact | |
| Impact force | Standard 5J (10J, 20J, 50J optional) |
| Installation method | The hammer head is adsorbed by electromagnet, and the conduit is screw-in type |
| Release method | Button control, electromagnet momentary release |
| Hammer release | Remote control |
| Height adjustment method | Remote control |
Equipment Overview
1. Main purpose: This device is composed of two kinds of impact
test apparatuses, and two kinds of mechanical strength test methods
can be used to perform impact test on EVSE shell.
2. Installation sample: installation of a single sample is less
than 1min
3. Applicable sample size:
Minimum (length × width × height, unit mm): customized according to
the sample
Maximum (length × width × height, unit mm): customized according to
the sample
4. The impact energy is formed by releasing the pendulum through
the electromagnet; and it has automatic electric brake to prevent
secondary impact;
5. The equipment is controlled by PLC, controlled by touch screen
and remote control, and the height of the strike point can be
adjusted by electric lift;
6. The adjustment of the striking height and the release of the
striking element can be controlled remotely
7. The sample mounting seat is welded by high-strength steel plate
and channel steel, which has the characteristics of high strength
and impact resistance. The sample to be tested is fixed with a
manual screw rod.
