|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
EVSE Testing Equipment Electric Vehicle Charging Pole IPXXD Test Wire
Equipment Overview
This is a precision test finger made in accordance the requirements of IEC 61032 test probe D, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP4, etc.
This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
It comes with an alligator clip, and with a M6 hole at the end of the handle for connecting with pull and push gauge to achieve specific force.
Technical Parameters
| Parameters /Model | SN2210-4 |
| Name | Test rod probe D |
| Test Wire Diameter | Ф1+0.05 0 (mm) |
| Stop Face Diameter | SФ35±0.2 (mm) |
| Handle Diameter | Ф10 (mm) |
| Test Wire Length | 100±0.2 (mm) |
| Handle Length | 100 (mm) |
