|
[China]
Trade Verify
Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact name:Zoe Zou
Sinuo Testing Equipment Co. , Limited |
|
Verified Suppliers
|
|
|
IEC60068-2-1 High and Low Temperature Test Environmental Chamber SN889-240L
Complied Standards & Clauses
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
Product Overview
1. Energy saving: The technology is based on the PWM solenoid valve customized by Sporlan Company in the United States. This technology realizes the regulation of the pipeline flow through the frequent actions of the solenoid valve. The standard solenoid valve cannot adapt to it, and it will cause fatigue damage in a short time. Currently, this technology is supported. The main performance valve is only produced by Sporlan Company in the United States. The following picture shows the difference between the solenoid valves.
2. Performance: The equipment conforms to the latest standards, the equipment is integral, beautiful and easy to transport;The main parts of the equipment are selected from well-known brands at home and abroad. The fully enclosed and imported French "" compressor with higher precision and the Hangzhou "Yuanfang" variable frequency power supply with better stability make the precision control more accurate during the operation of the equipment. Noise Lower, more stable performance and longer service life;
3.Device control: The device can be connected to multiple devices, controlled by mobile phone APP, and controlled by advanced PLC, which is more intelligent and more convenient to operate. The true color touch screen displays various test data (temperature, time, test curve), which is easier to operate. observation records;
4.Measurement and control system: real-time and dynamic display of test process and test curve, data processing through modular software, data reanalysis and editing of curve amplification, output of test reports and curve patterns in different formats, and support for networked data transmission.
5. Professional, safe and user-friendly design: emergency stop control switch, in case of emergency, can lock equipment reliably; effectively protect equipment; multiple protection of software and hardware to ensure the safety of equipment and personnel.
Technical Parameters
Main technical parameter
| No. | Project | Content |
| A | Product model | SN889-240L |
| B | Product brand | SINUO |
| C | Studio size | D600 x W800 X H500 mm (without motor) |
| Outer Dimensions | Cabinet part: about 14500 D × 1050W × 1570H mm | |
| D | Temperature range | -40℃～+250℃(range adjustable) |
| Temperature uniformity | ≤2.0℃ (stable state) | |
| Heating rate | ≥3.0℃/min (no load) | |
| Cooling rate | 1.0℃/min (no load) | |
| Temperature fluctuation | ±0.5℃ (stable state) | |
| Temperature deviation | ±2.0℃ | |
| E | Motor noise | ≤85dB |
| Weight | About 680kg | |
| F | Note | The above performance indicators are the values measured at room temperature +25°C without sample. |
| Material | Inner box material | SUS304# stainless steel plate |
| Outer box material | Cold-rolled steel plate, pickling and phosphating high-grade powder paint | |
| Insulation material | Rigid polyurethane foam + ultra-fine glass fiber | |
| Structure | Air duct parts | Centrifugal fan; the air outlet can adjust the air volume, height and return air volume |
| Door | (Single) Open hinged door, equipped with observation window, lighting, window frame/door frame anti-condensation electric heating device, door size: (approx.) 0.8*0.5M | |
| Test window | There is a conductive film explosion-proof tempered glass observation window on the door (with anti-condensation function) 380W×580H (mm) | |
| Fan | Long axis centrifugal fan | |
| Sample holder | Two built-in stainless steel adjustable movable trays | |
| Impeller | Imported stainless steel impeller from Taiwan | |
| Heater | Nickel-chromium alloy electric heater | |
| Refrigeration Compressors | Imported Tecumseh compressor | |
| Evaporator | Finned evaporator | |
| Cooling method | Mechanical compressor cascade | |
| Cooling method | Air cooling | |
| Temperature control instrument | Color touch screen imported from South Korea | |
| Lead hole | φ50mm, 1 piece (located on the left side of the box) | |
| Sample holder | 2 stainless steel sample racks, height adjustable. |
| Project | Principle description | |
| Heating system | Stainless steel tube sleeve type anti-dry heating tube with built-in nickel-chromium alloy heating wire | |
| U-shaped fin type stainless steel high-speed heating electric heater for heating | ||
| Completely independent system, does not affect the control line | ||
| Refrigeration system | Cooling method | Air-cooled |
| Refrigeration compressor | Adopt imported Tecumseh compressor, use environmentally friendly refrigerant | |
| Refrigerant copper tube | Internal spiral K-TYPE refrigerant copper tube | |
| Condenser | Corrugated fin type air-cooled condenser | |
| Evaporator | Slope type FIN—TUBE evaporator | |
| Freezing element | Original imported solenoid valve, drying filter, etc. | |
| Features | The whole system pipelines are tested for leak detection by ventilating and pressurizing 22kg. | |
| Heating and cooling systems are completely independent | ||
| Equipped with the company's professional technical characteristics, it can prevent the high temperature and high-pressure airflow from returning to the cooling machine and damage the system. | ||
| All refrigeration system action programs are completely controlled by microcomputer controller | ||
Adjustment system
| Project | Specifications |
| Adjustment method | Forced circulation ventilation, balanced temperature regulation. The control system controls the output of the heater according to the temperature point set by the system through the result of PID automatic calculation output, and finally achieves a dynamic balance.
|
| Circulation device | The built-in air-conditioning room, circulating air duct and long axial flow fan improve the air flow and heating capacity by improving the agitation airflow of the air, and greatly improve the temperature uniformity of the test chamber. |
Control system:
| Project | Illustrate |
| Controller | 7-inch PLC LCD touch programmable controller |
| Touch high-definition screen | The fixed conditions and program conditions can be set arbitrarily, the Chinese screen can be set, and the curing test name and serial number can be set. |
| Settable time range | 0—999H59min. |
Programmable mode
| At the same time, 120 groups of programs with different conditions can be set. In any group of programs, the work can be divided into 1200 segments, and the number of segments can be arbitrarily intercepted to execute the cycle, or the periodic cycle of any segment or group can be performed. |
| In each group of programs, up to 1200 different temperature and time sections can be set (each section can be set up to 999h59min). 120 groups of programs can be connected in series at will, and the maximum number of sections can be cycled up to 999 times. | |
| Safety | With a power-off memory device, the remaining programs can continue to be executed when the power is restored, and the machine can be reserved to execute the start-up and machine running time. |
| Control | Rising and cooling can be used for slope control and curve control, and has the function of self-correcting temperature and humidity reference points. It has the function of PID automatic calculation, which can reduce the convenience brought by manual setting. |
| Communication function | U disk interface, RS-232 interface, mis operation hardware lock, random computer communication software |
| Set up | Touch setting, direct display of position, all conditions are completely automatically locked by microcomputer |
| Alarm | If there is an error in the setting or operation, a warning signal will be provided |
| Output | The controller has a recording signal port output, which can be connected to a temperature and humidity recorder and output a recording curve |
| Interface | With standard RS-232 communication interface, long transmission distance, can be connected to PC for control and recording. |
Safety protection device
| Cooling System | Compressor overheating protection Compressor overcurrent protection Compressor high and low pressure protection Compressor oil pressure protection Liquid temperature over-temperature protection Ultra-high pressure relief protection Air-cooled: the condensing fan is overheated |
| Test box | Adjustable over temperature protection Air conditioning channel extreme over temperature protection Fan motor overheating protection |
| Other | Overload and short circuit protection Refrigeration system failure alarm protection caused by multiple openings of the box |
| Other configuration | |
| Power cable | AC380V power supply: five-core (three-phase four-wire + protective ground wire) cable (about 4 meters long) |
| Main power switch | Chint Circuit Breaker |
| Installation site | 1. The ground is flat and well ventilated 2. No strong vibration around the device 3. There is no strong electromagnetic field around the device 4. There is no flammable, explosive, corrosive substances and dust around the equipment 5. Appropriate space for use and maintenance should be reserved around the equipment, as shown in the following figure:
A: ≥40cm, B: ≥150cm, C: ≥100cm, D: ≥60cm, E: ≥40cm |
| Environmental conditions | 1. Temperature: 5℃～35℃ 2. Relative humidity: ≤85% 3. Air pressure: 86kPa～106kPa |
| Power supply conditions | AC380V power supply requirements: 1. Three-phase four-wire + protective ground wire 2. Voltage range: AC (380±38) V 3. Frequency fluctuation range: (50±0.5) Hz 4. The grounding resistance of the protective ground wire is less than 4Ω 5. The user is required to configure an air or power switch of the corresponding capacity for the equipment at the installation site, and this switch must be used independently for the equipment |
| Power supply | Imax≤20A Pmax≤6.5KW |
| Maximum current | Opening the door of the test box during the test will cause the temperature and humidity in the box to fluctuate; if the door is opened multiple times or for a long time or the test sample emits moisture during the test, it may cause the heat exchanger of the refrigeration system to freeze instead of working properly. |
Details
