Beijing Lekol Technology CO., LTD. |
|
Best-selling OCPP Wall Mounted Electric Car Charger Wallbox 22kw 3 Phase
Lekol enables you to bring energy-efficient AC/DC EV charger designs to life, with our highly efficient components and in-depth technical support. We cover power ranges from kilowatt to megawatt in our broad portfolioof high-quality power semiconductors, microcontrollers, gate drivers and security, and safety authentication solutions.
With the growing number of electric vehicles (EVs), which are in some markets becoming viable alternatives to traditional internal combustion engine vehicles, the demand for enhanced semiconductor solutions for charging stations increases too. Curently, all eyes are on Chiona where EVs have gained traction in the rapidly expanding middle class, while Europe suit soon.
Feature
* Full protection
Full electrical protection, over/under temperature protection, Protection
against lightning, leakage, short circuit, over current, etc.
* Stable
IP54 protection grade, capable for outdoor.
* Intelligent
LAN(RJ-45)/Wifi/ Background monitoring, RFID/QR payment support.
* European standard
OCPP 1.6 standard, type 2 or type 1 connector.
* Easy to install and operation
Wall-mounting or pole-mounting optional.
Charging Mode
Plug & Play: If you own a parking area, nobody can touch the charger, then you can choose the mode "Plug & Play".
RFID Cards: If you want to install the EV charger outside, and allow other persons get access to the chargers, then you can start and stop the charging by using the RFID card.
Remote Control by App: Our EV charging station supports the remote control by mobile App, through OCPP v1.6J. Now we also finished the development of our own App for home users.
Balancing Management
Full Charging: When there is no other home devices used, the power is enough for our fully charging;
Automatically Adjusting: when there are other home devices working, so the main circuit is not enough for the full charging, so the charger will adjust to reduce the charging capacity.
How it works: The ev charger have a current transformer to detect the balance current of the circuit and automatically adjust the charging power, which will make the charging more efficient.
PLC Wireless Communication: EV charging load management is delivered via a good solution, and this system is in constant communication with the vehicle charge points and the station’s power to ensure the safe charging.
Specification | |||
Charging Connector/ plug type | IEC62196-2 /Type 2 | SAEJ1772 /Type 1 | |
AC Power input rating | 1 phase 220V±15% | 3 phase 380V±15% | AC Level 2 240V |
AC Power Output Rating | 3.5KW /16A | 11KW /16A | 3.5KW/16A |
7KW/32A | 22KW/32A | 7KW/32A | |
/ | 43KW/63A | 10KW/40A | |
Rated Frequency | 50/60HZ | ||
User interface & control | |||
Charging control | Plug and charge √ | RFID card √ | CMS operate √ |
Display Screen | 4.3inch LCD screen | ||
Wifi connection | Support √ | OCPP Protocol | 1.6J √ & 2.0.1 √ |
Ethernet Interface | LAN(RJ-45) √ | APP interface | Support √ |
Environmental | |||
Storage Temperature | -40 ~ 75℃ | Operating Temperature | -30 ~ 55℃ |
Operating Humidity | Up tp 95%, non-condensing | Altitude | ≤2000m |
Cooling Method | Natural Cooling | ||
Protection | |||
Over Voltage Protection | √ | Under Voltage Protection | √ |
Over Load Protection | √ | Short Circuit Protection | √ |
Earth Leakage Protection | √ | Ground Protection | √ |
Over-temp Protection | √ | Surge Protection | √ |
RCD | RCCB or Type B | Protection ratings | IP54 ( CE certified) |
Wallbox Charger Mechanical | |||
Dimension(H×W×D,mm) | 410×260×164 | Weight | 1 phase :9kg, 3 phase:12kg |
Charging Cable Length | 5m or 7.5m or customized | Enclosure Material | Front-panel: Tempered Glass Back-cover: Plate Metal |
LQM3T Mounting Pole(Optional) | |||
Dimension(H×W×D,mm) | 1400×200×100 | Weight | <8kg |
Enclosure Material | Metal |
F.A.Q.
Q1: What is your terms of packing of EV Charging point?
A: We pack our EV Charging Point in cartons.
Q2: What's the MOQ?
A: Most of our products are in stock,no MOQ.If you have customized requirements, please contact us. We will
provide specific solutions for your requirements
Q3: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q4: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q5: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.