Anengji(Chengdu) New Energy Co., Ltd. |
Verified Suppliers
|
|
Wallbox 32A 7KW IEC 62196 type 2 EV charging stations level 2 ev charger
Product Description:
Electric is a specialist in EV charging station installations
around China in multiple different scenarios.
Our products possess the top-graded materials to withstand extreme
conditions, namely being temperature-resistant, water-proof, and
dust-proof, which comply with the IP54 certification.
We can install wall or floor-mounted EV Chargers, which are applied
in both indoor and outdoor settings, such as garages at home or
villa, carports, on-street parking and driveways.
Those charging stations can interconnect with payment systems and
back-office support through the OCPP platform for residential
management and commercial use.
Electric incorporates solar PV systems or energy storage systems
into our products. Meanwhile, all EV chargers are qualified with
level II charging speed. Therefore, people can efficiently charge
their electric vehicles by using solar energy.
Product Paramenters
Specification:
The Operation Process of Charging
1. Insert the EV charger (connect the charging plug)
2. Start charging (Method 1: Plug the charger and start charging;
Method 2: Use the designated charging card to swipe. The green
light flashes indicating normal charging.) Swipe the card again to
end charging.
3. Method 1: Pull out the charger to end the charging; Method 2:
Swipe the card again to end the charging
4. Put the EV charger back to its place
Precautions
1. For the first installation, attention should be paid to the
power cable according to IN-L (fire), IN-N (zero), PE (ground) one
by one, and the fire wire and zero wire cannot be reversed.
2. PE (ground wire) needs to be grounded reliably;
3. Make sure the emergency stop switch is activated after power on;
4. Before charging, make sure that the tip of the EV charger is
free from stains and water;
5. It is prohibited to place the AC charging stations (piles)
inside the car when charging.