Products complies with CCS2/CCS1/GB/T/CHAdello
standard:Various types for choice, include DC charging connector
(0-120A current ratingThe connector cam be replaced easily.
Humanized design with a good grasp feel, easy to use.Various
accessories available, protection cap include damping cap, metal
stringcap, etc
The plug ad socket termination type is wire crimping.
Excellent protection performace. protection grade IP54, it can keep
EV connectorworking even if use in a rainy day working condition.
laboratory simulationexperience-30 degrees of low terperature to 55
degree of high temperature
The output on this exceeds many wall mount units and most portable
units. I have the 32 amp model, there is also a 40 amp. Many
portables top out at 16. Even better, it is intelligent enough to
automatically adjust to both the circuit it is plugged into and
your vehicle's charging system. It will provide the fastest
available charge at both level 1 and level 2.
The display is on the small side, but provides all of the info one
needs. The vehicle plug is also top notch with a nice lock and
release lever. It even has an attached rubber cover for when not in
use.
There isn't much more to say other than the fact that this feels
and perform as the best charger you can get aside from, of course,
a Super Fast Charging Station, I'd recommend this in a heartbeat
for anyone looking for a portable charging solution that feels
sturdy and comes in a premium presentation and performance.
This is a great portable charger that still provides a 7kwh+
output, with a long and optional cable. The cable is flexible, and
has a nice quality plastic housing, which should hold up well for
many years.
Follow these steps for easy charging
1.Park the car at the charging point and turn off the engine.
2.Insert the Type 2 male plug end into the charger’s outlet socket.
Be sure to push firmly so the pins can fully locked.
3.Insert the Type 1 (SAE J1772, 5 pins) female plug end into your
car’s inlet socket. Be sure to push firmly so the pins can fully
locked.
4.Lock your car and the cable if the car supports.
5.After charging is complete, remove the plug from the car firstly
and then remove the male plug from the charging unit.