Active Member
|
[China]
Address: Rm. 3306, Int'l Tech Bldg., No. 3007, Shennan Middle Road, Shenzhen, Guangdong, China
Contact name:Tina
Shenzhen Topmay Electronic Co., Ltd. |
|
|
Product: Multi-layer Ceramic Capacitor Description: CAP, 3300F, 50V, ±10%, X7R, 0402
A. Main product specification
TMCC05 332 K 50V T 0402 X7R
① ② ③ ④ ⑤ ⑥ ⑦
① Series: Topmay SMD Multi-layer Ceramic Capacitor
② Capacitance: 3300pF
③ Capacitance Tolerance: ±10%
④ Rated Voltage: 50V
⑤Packaging: Tape & Reel packing
Complement:
⑥ Dielectric: X7R
⑦ Size: 0402(inch code), L: 1.00 ± 0.10mm, W: 0.50 ± 0.05 mm T: 0.50 ± 0.05mm
B. Structure & Dimension
| TOPMAY P/N | Dimension(㎜) | |||
TMCC05-332K50VT0402X7R | L | W | T | BW |
| 1.00 ± 0.10 | 0.50 ± 0.05 | 0.50 ± 0.05 | 0.25 ± 0.10 | |
Reliability Test and Judgment Condition
| Judgment | Test condition | |||||
| Capacitance | Within specified tolerance | Freq.: 1.0 kHz ± 10% Voltage: 1.0Vrms ± .2V For Cap > 10µF, 05Vrm @ 120H | ||||
| Tan δ (DF) | 3% max. | A capacitor prior to measuring the capacitance is heat treated at 150℃+0/-10℃ for 1hour and maintained in ambient air for 24±2 hours. | ||||
| Insulation | 100,000MΩ or 1000MΩ - µF, whichever is less | Charge device with rated voltage for 120 ± 5 secs @ room temp/humidity | ||||
| Resistance | ||||||
| Appearance | No abnormal exterior appearance | Microscope (×10) | ||||
Withstanding Voltage | No dielectric breakdown or mechanical breakdown | Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. | ||||
| Characteristics | X7R (From -55℃ to 125℃, Capacitance change should be within ±15%) | |||||
| Adhesive Strength | No peeling shall be occur on the | 500g×F, for 10±1 sec. | ||||
| Termination | terminal electrode | |||||
| Bending Strength | Capacitance change : | Bending to the limit (1m) | ||||
| within ±12.5% | with 1.0mm/sec. | |||||
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality.
Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production
average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than
that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a
quotation?
Basically for capacitor, it requires to know detailed capacitance
and voltage. If you have more information, such as type, product
photo for reference, you could kindly provide too.
Our series of strong products of capacitors can be divided into
below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65,
CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in ,
Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are
as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
