Home Companies Shenzhen linkopto Technology Co. Ltd

1000BASE Copper Small RJ45 Sfp Module , Commercial Sfp Transceiver Rj45 Copper

Shenzhen linkopto Technology Co. Ltd
Active Member

Contact Us

[China] country

Address: 6/F,NO.2 Building,Delux Industrial Park,Guanlan Hi-tech park,Longhua Dist,Shenzhen,China

Contact name:Will

Inquir Now

Shenzhen linkopto Technology Co. Ltd

1000BASE Copper Small RJ45 Sfp Module , Commercial Sfp Transceiver Rj45 Copper

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

Copper SFP 1000M Copper-T SFP RJ45 100M Compatible with Juniper

The Gigabit RJ45 Copper SFP transceiver (mini-GBIC) is built to comply with MSA standards to provide a cost-effective to add, replace or update an Ethernet copper port on its networking equipment.
With Auto-negotiation 10/100/1000 Mbps at distances up to 100 meters, this Ethernet SFP transceiver can be installed on network devices with fiber SFP MSA compliant port. Delivering convenience and scalability, this copper SFP transceiver is fully hot pluggable, allowing you to install the module without disrupting network traffic or rebooting the device.


Features

Ø Up to 1.25Gb/s bi-directional data links

Ø Hot-pluggable SFP footprint

Ø Low power dissipation (1.05 W typical)

Ø Fully metallic enclosure for low EMI

Ø Compact RJ-45 connector assembly

Ø Access to physical layer IC via 2-wire serial bus

Ø TX Disable and RX Los/without Los function

Ø 1000 BASE-T operation in host systems with SERDES interface

Ø Operating case temperature range of

              0°C to +70°C (Commercial)

              -20°C to +85°C (Extend)

 

Applications

Ø Fiber Channel

Ø Gigabit Ethernet

Ø Switch to Switch interface

Ø Router/Server interface

Ø Switched backplane applications

Ø Other optical transmission systems

 

Description

Linkopto  Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable.

 

Linkopto module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

 

The SFP module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.

Quality Control

 

 

 

 

Related Compatible List

 

Item No.Description
SFP-BX-53-L10SFP 10km TX1550nm/RX1310 1.25G DDM LC connector
SFP-BX-35-L10SFP 10km TX1310nm/rx1550 1.25G DDM LC connector
SFP-GE-TRJ45 SFP 10/100/1000 mb/s, 100m (UTP RJ45
SFP-BX-53-S20SFP 20km TX1550nm/RX1310 1.25G DDM SC connector
SFP-BX-35-S20SFP 20km TX1310nm/rx1550 1.25G DDM SC connector

 

Hot Products

SFP Optical Transceiver GLC-SX-MMD 1.25G SFP MM 850nm 550km Duplex LC Description The SFP transceive...
PN: OBS31123CDL40 1.25G SFP Transceiver SC 1310 nm 3km SM Duplex SC be Compatible with Cisco, HUAWEI...
PN: OBS31123CDL10 1.25G SFP Transceiver SC 1310 nm 10km SM Duplex LC be Compatible with Cisco, ...
PN: OBS55123CDL80 1.25G SFP Transceiver SC 1550nm 80KM Duplex SC be Compatible with Cisco, HUAWEI…… ...
PN: OBS85123CDLM 1.25G SFP Transceiver SC 850nm 550M Duplex SC be Compatible with Cisco, HUAWEI…… ...
PN: OBS31123CDL40 1.25G SFP Transceiver SC 1310 nm 3km SM Duplex SC be Compatible with Cisco, HUAWEI...