Home Companies Shenzhen Flier Electronic Co., Ltd.

Flier Quick Response RC Boat ESC Speed Controller 120V 500A 12 Months Warranty

Shenzhen Flier Electronic Co., Ltd.
Active Member

Contact Us

[China] country

Address: 5 Floor,SongShan Building B14, YinTian Industrial Zone, Baoan District, Shenzhen,China

Contact name:James Shaw

Inquir Now

Shenzhen Flier Electronic Co., Ltd.

Flier Quick Response RC Boat ESC Speed Controller 120V 500A 12 Months Warranty

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

RC Boat ESC Brushless Powerful ESC 120V 500A With Black Heat Shrink For RC Boat

 

 

 

RC Boat ESC Basic information:

 

 

Working
Voltage
Max CurrentSize(mm)Weight(g)BEC (Volts/Amps)Box Programming supportComputer Programming supportUSB program 
 
3-120V500A182*100*301200gOPTOYesYesYes
 

 

 

Feature:

 

There are three wires for the receiver port:

--- The brown wire is ground,
--- The yellow wire is pulse signal wire, it is a 5V PWM pulse signal you just controll the ESC via the wire,
--- The red wire is the power wire 5V input to the ESC; you must supply a 5V voltage to the red wire otherwise the ESC won't work.

A standard receiver signal is 1-2mS@50Hz. It is saild that the receiver will send 1-2mS 5V pulse per 20mS to the ESC. 1mS pulse will arm the ESC,and the motor will stop. when increase the throttle, the pulse width also increase, about 1.1mS, the motor will start to spin, and 2mS, the motor will spin at full speed.

 

 

The unmanned electromechanical adjustment has a total of five lines. 3 at one end, 2 at the other end, 3 with the motor connected to 3 lines, no matter whether it is positive or negative.

 

As long as the direction of rotation is reversed, any two wires can be exchanged. The other two are power cords, which are directly connected to the battery. Forgot to have a thin servo plug, this is directly connected to the flight controller or receiver.

 

Design for Boat, more functions.

Battery voltage from 30V to 120V for super high voltage version.

Two way communication while connecting it with computer.

Firmware can be upgrade by user.

Motor cable can be inspected while Connecting the power battery

Simply set function value by Prog-Box or by PC via USB link wire.

Li-MH/Li-Po,Ne-Cd/Ne-mH,LiFe battery can be use.

Enables setting the voltage per cell for the point at which the controller’s cut off circuitry engages.Li-MH/Li-Po from 2.0-3.6V,Ne-Cd/Ne-mH 0.4-1.0V,LiFe from2.2-2.8V

Reverse function. the delay time of reverse is adjustable

The power of the motor forward/ reverse can be set.

Automatically detection the throttle route or can be set a fixed number by manual operation.

Auto cut off the power within 3 seconds if no radio signs.

Timing setting may be adjusted (0°-30°) to suit the motor type.

 

RC Boat ESC Setting function value:

 

 

1. Reverse: On/Off.

 

2. Timing:,1°,2°,3°,4°……30°.

 

3. Frequency: 8KHz, 16 KHz, 32 KHz.

 

4. Acceleration: Soft / Medium / Hard.

 

5. Accumulator type:NiCd/NiMh,Li-Ion/Li-Pol,LiFe.

 

6. NiCd/NiMH CUTOFF:×0.05,0.4V,0.5V,0.6V,0.7V,0.8V,0.9V,1.0V.×0.05 means the cut off voltage is 5% the voltage while connecting.

 

7. Number of cells:Auto,2S,3S,4S,5S,6S,7S,8S,9S,10S,11S,12S,16S.

 

8. LiIo/Pol CUTOFF:2.0V,2.1V,2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V,2.9V,3.0V,3.1V,3.2V,3.3V,3.4V,3.5V,3.6V.

 

9. LiFe cutoff:2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V

 

10. Cut Off Type::Slow down,Hard. l

 

11. Power limited forward: Off, 75%, 50%, 25%.

 

12. Power limited reverse: Off, 75%, 50%, 25%.

 

13. Delay time when direction convert: 0.25S, 0.5S, 0.75S, 1S, 1.5S, 2S, 3S, 5S.

 

14. Reverse point:Auto,fixed 1.0mS,fixed 1.1mS,fixed 1.2mS,fixed 1.3mS.

 

15. Forward point:Auto,fixed 1.7mS,fixed 1.8mS,fixed 1.9mS,fixed 2.0mS.

 

16. Throttle curve: Logarithmical,Linear,Exponential.

 

17. Rotation direction: Left, Right.

 

18. Timing monitor (TIMING MONTITOR): ON, Off.

 

Note:the red mark is the factory default value,you can setting function value by youself.

 

RC Boat ESC Products Picture:

 

 

Trade Terms:

 

1. Payment :T/T ,Paypal,West union .

 

2. Production lead time :5 days for 100-200 pcs ,10days for 200-300pcs .

 

3. Sample can be delivered within 3 days.

 

4. Discounts are offered based on order quantities .

 

5. MOQ: 2 pcs.

 

Shipping&Return:

 

1. Items will be shipped within 3 business day after payment completed received.

 

2. Items are shipped from DHL Express ,UPS ,EMS,, reach most of the countries within 3-7 days respectively.

 

3. Warranty Period is 2 yrs for this item.

 

4. If product can not work, or find it as defects within in 7 days after receipt, please contact us, we will replace or refund.


5. All emails will be answered within 1 working day.

 

Hot Products

HV 16S 240A Brushless Powerful ESC With White Heat Shrink for RC Boat Efoil​ Basic information: ...
RC Boat ESC Brushless Powerful ESC 120V 500A With Black Heat Shrink For RC Boat RC Boat ESC Basic ...
Lightweight 8S 200A RC Boat ESC Brushless Motor ESC BEC 5V/2A Watercool Basic information Voltage ...
Programmable Brushless ESC For Waterproof Brushless Motor ESC 16S 400A Basic information Voltage ...
FLIER 400A 3-16S high voltage ESC brushless speed controller with USB program cable for boats marine ...
HV 16S 240A Brushless Powerful ESC With White Heat Shrink for RC Boat Efoil​ Basic information: ...