|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
Machine General Introduction
F250x250 Auto high frequency welded pipe mill line is mainly to
produce the square pipe size 100x100-252x250mm,rectangular pipe
100x150-100x300mm,thickness is from 5-16mm. This line can produce
same size round pipe through change stand and roller .This
production line each unit use the most advanced technology,
innovative design, full control with PLC control, advanced
technology, convenient operation and maintenance, and reached the
international level.
(1)Material Specifications: | |
Standard | Internatioanl standard tube mill machine |
Material | galvanized steel |
Mechanical properties | σb≤520Mpa,σs≤365MPa |
Strip Width | 400-1000mm |
Strip Thickness: | 5-12mm |
Inner Diameter of Coils | Φ508mm |
Outer Diameter of Coils | Φ1300～φ2000mm |
Coil Weight | ≤25T |
(2)Pipe Specification | |
Pipe Diameter | Square pipe:100x100-250x250mm |
Length | 6-12m |
Pipe-cutting Precision | 0-6mm |
Forming Speed | max 100m/min for 1 mm thickness |
(3)The buyer should self-supply | |
Work shop | 95x12m, H＞5m(crane to ground) |
Power | Approx.2500KW 380V/60Hz/3phases |
Circulation Cooling Water(whole system) | Flow:30+30 CBM |
Compressed Air | Flow:5m3/min |
Cable | All cable outside of my machine, you buy after machine fix location. |
strip steel to coil→uncoiler →end straightener→flattener→shear welder→storage material unit →formed,welding,cooling,accurate pipe Dia. size →accurate pipe length size,cutting→inspection →package
1.In a very short period of time to finish the adjustment of the
roller, extreme reduce the roller change time when replace the
products, thus improve the efficiency and reduce the productive
cost;
2.ue to the equipment adopts one set of combined mould, producing
the different specifications of the tube, only need to adjust,no
need to change,the roller savings rate at above 90%,thus reducing
the cost of the roller; Need change up roller for final open stand
when produce 80x80mm tube. This machine can produce round pipe
through change some stands or shafts offline.
3.With servo motor adjustment, decreased the input of tools and
damage to equipment when change the roll, improve the service life
of the equipment.
4.Due to structure of the composite roll,the point contact between
the roll and strip instead of the original line contact,reduce the
roll wear and improve the service life of roll.
5.Transit motor use the brand of SIMENS BEIDE, Bearings use the
brand of NSK,the roller material use High complexing gold Cr20
