|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
ERW Tube Mill Other Model
| Model | Diameter Range | Pipe Thickness | Line Speed(m/min) |
| HG20 | 8-25.4MM | 0.3-1.2MM | 120 |
| HG32 | 10-32MM | 1.4-1.5MM | 120 |
| HG50 | 16-76MM | 0.7-2.5MM | 30-120 |
| HG76 | 25-76MM | 1-4MM | 30-100 |
| HG89 | 32-89MM | 1-4.5MM | 30-80 |
| HG114 | 45-114MM | 1.5-5.0MM | 30-60 |
| HG165 | 60-165MM | 3-7MM | 30-50 |
| HG219 | 114-219MM | 4-8MM | 20-40 |
| HG273 | 114-273MM | 4-10MM | 15-30 |
| HG325 | 165-325MM | 4-10MM | 10-30 |
| HG426 | 165-426MM | 4-12.7MM | 8-25 |
| HG508 | 219-508MM | 4-16MM | 8-20 |
Technology Procedures
Uncoiler→Shear&end welder→Honrizontal accumulator→Leveling→Forming→HF welding→Scraper→Cooling→Sizing→Straightening→Flying saw cut off→Run out table
MainTechnical Specifications
| Item | Patameter | |
| Material | Hot/cold rolled carbon steel or Galvanized steel coil | |
| Finished porducts Requirement | Round pipe | 25.4-63.5mm |
| Square pipe | 20*20-50*50mm | |
| Rectangle pipe | 15*25-60*40mm | |
| Thicness | 1-1.5mm | |
| Place requirement | Place type | Separate layout |
| Loyout type | Input,Side output(look from main console,decided by customer) | |
| Production speed | 0-80m/min | |
| Cutting motor | 15Kw | |
| Cutting Type | Hot friction saw | |
| Cutting tolerance | ±3mm | |
| Tracking motor | 11Kw | |
| Pneumatic system | 0.4-0.7Mpa | |
Installation (optional by the buyer)
a.After the machine arrives at the destination, the seller will send technician to the buyer’s factory to install the machine if the buyer wants. The buyer needs provide some technicians to assist the installation work.
b.Installation period(The buyer should have been prepared for the steel sheet, foundation position the machine before seller’s technicians departure): 5 days
c.The buyer pays the installation charges to the seller’s appointed account before the technician departure: USD1,000 per set.
d.Training period: 2 days. (we can supply training on the operation spot if buyer needs)
e.The buyer pays the seller’s technician: Travel cost outside China (including round flight charges), accommodation and foods (at least three-star hotel with air condition), solve the language problem, provide transportation from living place to the work place, and insurance out of China, etc.
f.With in 3 months after arrival of the goods at the port of destination, if there is no installment requirement from the Buyers, the goods should be counted as up to standard. Inspection standard is based on the technical standard signed by both parties and our company standard.
