|
[China]
Trade Verify
Address: No.15,Shanqian Road,Economic Development Zone,Hebei,China
Contact name:Yan
Hebei Tengtian Welded Pipe Equipment Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
Item | Specification |
Hot or cold-rolled steel strip | As per GB700-88 or GB1591-88 |
Material | Low-carbon steel, low alloy steelδs≤345Mpa,δb≤610Mpa |
The thickness of steel strip | 0.8-2.5mm (As per GB708-88) |
The width of steel strip | 60-200mm |
I.D. of steel coil | Φ450-Φ550mm |
O.D. of steel coil | Φ800-Φ1200mm |
Maximum weight coil | 2500kgs |
Dimension range of processing steel pipe
Item | Specification of pipe mill |
O.D. | Φ19-Φ63.5mm |
Wall thickness | 0.8-2.5mm(square pipe and special-shaped pipeδ≤2.0mm) |
Length | 4-8m |
1) roller shaft diameter is big, amount is big, and mateiral
42CrMo.
2) equipped double motors, efficiency is good.
3) tube making efficiency is high.tube straightness is good.
4) reliability is high and failure rate is low.
5) operation is convenient.
6) computer saw adopts shengyang brand, the quality is the best one
in domestic.
7) high frequency welder adopts the best brand in china.
ERW Tube Mill Other Model
| Model | Diameter Range | Pipe Thickness | Line Speed(m/min) |
| HG20 | 8-25.4MM | 0.3-1.2MM | 120 |
| HG32 | 10-32MM | 1.4-1.5MM | 120 |
| HG50 | 16-76MM | 0.7-2.5MM | 30-120 |
| HG76 | 25-76MM | 1-4MM | 30-100 |
| HG89 | 32-89MM | 1-4.5MM | 30-80 |
| HG114 | 45-114MM | 1.5-5.0MM | 30-60 |
| HG165 | 60-165MM | 3-7MM | 30-50 |
| HG219 | 114-219MM | 4-8MM | 20-40 |
| HG273 | 114-273MM | 4-10MM | 15-30 |
| HG325 | 165-325MM | 4-10MM | 10-30 |
| HG426 | 165-426MM | 4-12.7MM | 8-25 |
| HG508 | 219-508MM | 4-16MM | 8-20 |
Our Services
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping
