Hebei Huayang Steel Pipe Co., Ltd. |
|
Anti rust Oil Field API 5L X56 18M OD 1420mm Saw Steel Tube
(1) Improve the geometrical dimensional accuracy of the pipe body
and pipe end of the lsaw steel pipe, so that the diameter and
roundness of the pipe body and the pipe end and the diameter
difference between the two ends of the steel pipe meet the standard
requirements, which is convenient for on-site welding construction.
(2) Reducing the uneven deformation of the forming and welding
process of lsaw steel pipe, reducing the residual stress of the
pipe body caused by molding and welding, improving the distribution
and improving the overall mechanical properties of the steel pipe.
(3) Conduct a comprehensive and effective inspection of the overall
performance of the steel pipe.
(4) The cold expansion diameter also has the effect of improving
the straightness of lsaw steel pipe, especially the straightening
effect on the smaller diameter straight seam submerged arc welded
pipe.
After the cold expansion of the lsaw steel pipe, the diameter of
the pipe body and the pipe end will increase by about one percent.
The diameter, the roundness and the diameter difference between the
two ends of the steel pipe are greatly improved, and the
straightness of the steel pipe is also greatly improved. The length
is reduced by about 0.5%, and the wall thickness is reduced by
about 0.8%. In the development of the lsaw steel pipe process,
these changes should be fully considered to determine the width,
length and thickness of the pipe sheet and the outer diameter of
the steel pipe before the diameter expansion, so as to avoid the
geometrical dimension of the steel pipe after the expansion is not
up to the final requirements. LSAW pipe (longitudinal Submerged Arc
Welding Pipe) is fromed by JCOE with one straight welded seam, the
outer diameters usually from 610mm to 1420mm. When the outer
diameter is 914.4mm above, it’s allowed two straight welded seams.
LSAW pipe is used to convey low pressure liquid meida or high
pressure petroleum or natural gas, and can be also used widely in
structural supports or foundation. The advantage for LSAW type is
they could produce more thick wall thickness of pipes, maximum to
50mm.
Size:
Outer Diameter: 610mm-1420mm
Wall Thickness: 6.35mm-50mm
Length: 6mtr-18mtr
End:square ends (straight cut, saw cut, and torch cut). or beveled
for welding, beveled,
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized,
Black, Bare, Varnish coating/Anti rust oil, Protective Coatings
Packing:Plastic plugs in both ends, Hexagonal bundles of max.
2,000kg with several steel strips, Two tags on each bundle, Wrapped
in waterproof paper, PVC sleeve, and sackcloth with several steel
strips, Plastic caps.
Test:Chemical Component Analysis, Mechanical Properties (Ultimate
tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test,
Bending Test, Blow Test, Impact Test), Exterior Size Inspection,
Hydrostatic Test, X-ray Test.