|
[China]
Trade Verify
Address: Lane 299, Guanghua Road, High-tech Zone, Ningbo City, Zhejiang Province
Contact name:Xu
NINGBO PINSHENG MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
Accurate PRE Expanded Polystyrene Bead Making Machine
This series of models adopt digital sensor, accurately control each link to greatly improve the efficiency of foaming, through automatic weighing device to make foaming more accurate
Main Features:
1. All process including filling, expanding, sieving, delumping and conveying to silos are done automatically.
2. With primary and secondary expansion device to get density of 8-30g/l
3. Fist filling is controlled by frequency converter
4. With power-off protection device
5. With Japan / Germany steam presure reducing valve
| Item | Unit | PSPEB-A90 | PSPEB-A130 | PSPEB-A150 | |
| Expansion Chamber | Diameter | mm | ∅900 | ∅1300 | ∅150 |
| Volume | m³ | 0.85 | 2.4 | 5.4 | |
| Useable volume | m³ | 0.6 | 1.6 | 4.5 | |
| Steam | Inlet | mm | ∅50 | ∅65 | ∅100 |
| Consumption | kg/cycle | 2-4 | 10-12 | 18-20 | |
| Compressed air | Consumption | m³/cycle | 0.3-0.4 | 0.7-0.9 | 0.5-0.8 |
| Pressure | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | |
| Drainage | Drainage port | mm | ∅100 | ∅100 | ∅150 |
| Condensation | mm | ∅40 | ∅100 | ∅50 | |
| Connected load | Installing power | Kw | 17 | 21 | 40 |
| Density | g/L | 12-90 | 12-30 | 12-30 | |
| Out side dimensions | % | ±1.5 | ±2 | ±2 | |
| Material conveying | mm | ∅150 | ∅150 | ∅200 | |
| Overall size (LXWXH) | mm | 6500X2000X4900 | 7400X3000X4500 | 11000X2850X6100 | |
| Weight | kg | 2500 | 4250 | 8000 | |
| Room height required | mm | 5000 | 6000 | 7000 | |
| Productivity | kg/h | 18g/L 350 | 12g/L 530 | 12g/L 1000 | |
| kg/h | 25g/L 480 | 15g/L 670 | 15g/L 1300 | ||
| kg/h | 32g/L 540 | 20g/L 920 | 18g/L 1800 | ||
| kg/h | 50g/L 600 | 30g/L 1220 | 25g/L 2400 | ||
FAQ
1. Where is your factory located?
We have 2 production plant, one plant locates in Hangzhou which
professionally producing EPS/EPP/ETPU machine. Another factory
locates in Jiangsu Provide which producing EPS/EPP/ETPU mould. Both
two factories are pretty close to the Shanghai port for easiest
transportation.
2. Do you have detailed and professional installation manual?
We will provide very detailed installation manuals and videos, and
the service until you are satisfied
3. Are you a trading company or a manufacturer?
We are manufacturer.
4. How long is your delivery time?
Normally delivery time is 30~45 days.
5. How many years have your company made this kind of equipment?
More than 10 years.
6. Can I only buy some spare parts from you?
Yes, we also provide all kinds of spare parts that relatives to our
machine.
7. How do you pack the equipment?
We will strengthen and protect the equipment to ensure that they
will not be damaged during transportation
8. Can you send your staff to install the equipment for us?
Under normal conditions, it is possible. Now it is an epidemic
situation.
We will try our best to assist in case wecannot send technician in
time. We will also conduct video connections with guests to teach
them to install them in place.
9. Can you can design the equipment according to our size?
Yes, it is acceptable
10. How many production lines in your factory?
We have total 10 production line.
