Active Member
|
[China]
Address: Building 21, Shangding Enterprise Park, Yubei District, Chongqing, China
Contact name:Gelon
Chongqing Aorun Industrial Co., Ltd. |
|
|
Quick Detail:
| Name | Epoxy Resin 4040 | Feature | High transparency, easy to eliminate bubbles, high hardness, anti-yellowing, fast curing |
Mixing Ratio | 1:1 | Cure Condition | 25℃, party curing 10 hours, fully curing 24 hours (48 hours in winter) |
Description:
Epoxy resin 4040 is a liquid resin. A wide variety of curing agents is available to cure liquid epoxy resins at ambient at ambient conditions.The most frequently used are aliphatic polyamines, polyamides, amidoamines, cycloaliphatic amines and modified versions of these curing agents. These systems are sometimes cured at an elevated temperature to improve selected properties such as chemical resistance and glass transition temperature. Elevated temperature cures are necessary and long post-cures are required to develop full end properties if anhydride of catalytic curing agents are employed.
Typical Applications
-Adhesives
- Casting and Tooling
-Civil Engineering
-Marble coutertop coating
Appearance Clear liquid, no visible mechanical impurity
Product advantages:
Low viscosity,and it can be used as a solvent-free paint without
VOC emissions.
Low color,lower absolute value of yellowing
High bonding strength, wild application
Excellent corrosion resistance with tough and wear-resistant film.
Good adhesion,fluidity and permeability.
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
Applications:
Arun-4040s - Level Epoxy Rajini Coating
For wood surfaces, we recommend applying an epoxy sealant (similar
material, only a small pictured coat) to secure your coat before
pouring it into the equation. The sealing shafts are cut at a thin
level and are used to seal some holes in the surface and not to
create air bubbles at the next flood level. This step is followed
by a flood situation, which will swim to 8 / ´´ and self-water.
Floods should be drained approximately one hour after the water level. Do not exceed 6 hours Flood shirts can be applied at the temporary 1/8 'level as desired, but only a table average for restaurant tables, countertops and stones.
Additional concrete surfaces are also used to cover all objects, such as the construction of memorials, where epoxy is needed to cover them properly.
FAQ:
Q: Does your company provide samples?
A: Yes,we can provide 100g and 200g for additive and 500g/1kg for
resin as free samples, but freight usually requires the buyer to
bear.
Q:What is your company's transportation form?
A: Samples generally deliver by international express, a large
number of goods can be transported by land or water.
Q: What is the quality and price of your product?
A: Specializing in epoxy resin and other unsaturated polyester
resin .100% tested and working before shipment .best price will
grant you as per your quantity .
