Active Member
|
[China]
Address: No.11 Wusong 1st Street, Dongcheng District, Dongguan 523117, Guangdong, China
Contact name:Choi
Guangdong Bell Experiment Equipment Co., Ltd |
|
|
Temperature And Humidity Environmental Test Chamber Three Box
Temperature Humidity Test Chamber Application
DGBELL’s Temperature Humidity Test Chamber is able to simulate a wide range of temperature and humidity environment conditions for testing various products and components. It is widely used for basic thermal cycling tests and accelerated stress tests. We provide 6 standard models, test cabinet from 80L to 1000L, customized size is also available.
The temperature humidity test chambers use imported temperature controllers to control temperature and humidity. Programmable controllers can be used to set a variety of parameters. The temperature and humidity are directly displayed digitally, and the operation of the constant temperature test chamber is convenient.
Features of Temperature Humidity Test Chamber
Introduced Japanese and German refrigeration technology, Energy Saving 20%.
Easy operation, available for both fixed value test and programmable test.
Available for the customized design and provide various options to meet different test requirements.
RS485 and RJ45 communications, available to computer remote control.
Fog-free observation window and interior light to view product under test.
Programmable
Temperature Humidity Testing Standard
IEC 68-2-1 Environmental testing – Part 2: Test methods – Tests A: Cold
IEC 68-2-2 Environmental testing for electric and electronic products Test methods – Tests B: Dry Heat
IEC 68-2-3 Environmental testing for electric and electronic products – Part 2: Testing method test Cab: Damp heat Steady state
IEC 68-2-30 Environmental testing for electric and electronic products – Part 2: Test method – Test Db: Damp heat,cyclic ( 12h+12h cycle)
IEC 68-2-14 Environmental testing for electric and electronic products-Part 2:Test methods-Test N: Change of temperature
MIL-STD-810D High temperature test
MIL-STD-810D Low temperature test
MIL-STD-810D Damp heat test
Temperature Humidity Test Chamber Parameters
Model | BTH-80 | BTH-150 | BTH-408 | BTH-800 | BTH-1000 |
|---|---|---|---|---|---|
Test Space W x H x D (mm) | 400x500x400 | 500x600x500 | 600x850x800 | 1000x1000x800 | 1000x1000x1000 |
External Dimension W x H x D (mm) | 650x1650x1270 | 700x1700x1370 | 650x1650x1270 | 1200x1900x1620 | 1200x1900x1820 |
Cooling Method | Air-cooling | Air-cooling | Air-cooling | Air-cooling | Air-cooling |
Temperature Range | A:-0～150℃ B:-20～150℃ C:-40～150℃ D:-70～150℃ | ||||
Humidity Range | 20%RH-98%RH (details see temperature humidity control diagram). | ||||
Temperature Fluctuation | ±0.5℃ | ||||
Humidity Fluctuation | ±2％RH | ||||
Temperature Deviation | ≤2.0℃ | ||||
Humidity Deviation | A)>75%RH:≤+2,-3%RH,B)<75%RH:≤±5%RH. | ||||
Temperature Uniformity | ≤±2.0℃ | ||||
Humidity Uniformity | +2,-3%RH | ||||
Heating Rate | Approx 3℃/mins,average non-linear ,no load | ||||
Cooling Rate | Approx 1℃/ mins,average non-linear ,no load | ||||
Temperature Overshoot | ≤±2℃ | ||||
Internal Material | 1.2mm thick SUS#304 high &low temperature resistance stainless steel. | ||||
External Material | Adopt flame retardant high strength PU Polyurethane foam insulation material. | ||||
Control Method | Touch screen programmable PLC, with USB interface, with RJ485 interface can be connected to computer controlling, special network control software, convenient remote monitoring, data acquisitioning. | ||||
Compressor | Tecumseh (France)-fully air-cooled double-fall cooling compressor. Or Bock (Germany) semi-enclosed air-cooled refrigeration. | ||||
Safety Protection | Explosion-proof pressure relief device, explosion-proof chain, mobile phone alarm device, networking, smoke exhaust device, fire extinguishing device, etc. | ||||
