Lab Drying Oven Two Box-Type Hot And Cold Impact Chamber GB/T2423.1.2-2001 Environment Test Machine

Lab Drying Oven Two Box-Type Hot And Cold Impact Chamber GB/T2423.1.2-2001 Environment Test Machine

Description:

Temperature and Humidity Test Chamber is used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials. Suitable for testing the quality of products such as electronics, electrical appliances, mobile phones, communications, meters, vehicles, plastic products, metals,food, chemicals, building materials, medical care, aerospace, etc.

Main Features:
1. Large color LCD touch interactive microcomputer control system, easy to understand, running at a glance;
2. Closed imported compressor + environmental refrigerant, cold plate heat exchanger and dual-type ultra-low temperature
refrigeration systems;
3. A LAN network communication interfaces to computer remote control, easy to use.
4. Independently set the heat, cold and hot and cold conditions, the impact of three different function, the impact of the
implementation of hot and cold conditions, with high and low temperature testing machine functions.
5. Operation at boot time automatically make an appointment ahead of pre-cooling, preheating, standby.
6. Defrost cycles can be set and the number of automatic (manual) defrost.
7. Controller friendly interface and easy procedure setting, abnormal and troubleshooting display complete.

TEST CHAMBER APPLICATIONS
1. To simulate test environment with different temperature and humidity
2. Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
3. Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
4. Uncover test unit weakness in a short-term test with accelerated time effect

 

TEST CHAMBER DESIGN FEATURES
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain

 

TEST CHAMBER PROGRAMMABLE CONTROLLER
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output

Model:

(Model)		B-TCT-401	B-TCT-402	B-TCT-403)	B-TCT-501	B-TCT-502	B-TCT-503	B-TCT-601	B-TCT-602	B-TCT-603
Internal Dim (CM)		30x30x30	40x40x40	50x50x50	30x30x30	40x40x40	50x50x50	30x30x30	40x40x40	50x50x50
External Dim(CM)		118x185x180	128x195x190	138x205x200	118x185x180	128x195x190	138x205x200	118x185x180	128x195x190	138x205x200
Sample Weight		5KG	10KG	20KG	5KG	10KG	20KG	5KG	10KG	20KG
Low Temp Range		-10℃--60℃			-10℃~-70℃			-10℃--80℃
Test Temp Rang		-40℃-150℃			-55℃~150℃			-65℃~150℃
HighTemp Rang		+80℃-200 ℃ lvarious specifications applicablel
Recovery time		Within 3 minutes
Interior		SUS#304Stainless steel plate
Exterior		Coating or SUS#304Stainless steel plate
Power Source		AV:380V 50/60Hz
Power(KW)		13.5KW	15KW	19KW	13.5KW	15KW	19KW	15KW	19KW	22KW

 

Company: