|
[China]
Trade Verify
Address: Number 661-662 of New Guangcong Autoparts Town, the north of Baiyun da dao, Baiyun district, Guangzhou, China.
Contact name:Jessica
Guangzhou Teikuko Auto Parts Co.,ltd |
|
Verified Suppliers
|
|
|
Casting or Forged Steel Cranskaft 2Z Auto Spare Parts Crankshaft for TOYOTA 13411-78701-71
SPECIFIIONS:
| Item Name | Crankshaft | Length(mm) | 587 mm |
| OE NO. | 13411-78701-71 | Main journal(mm) | 74mm |
| Engine Model | 2Z | Rod Journal(mm) | 55mm |
| Warranty | 1 year or 100000km | Stroke(mm) | 57.5mm |
| N.W(KGS) | 28.2kgs | Certifie | ISO9001:2008;ISO/TS16949:2009 |
IDENTIFY WAYS OF FORGED STEEL & CASTING IRON:
a> Appearance: casting iron crankshaft appearance is more rough
than forged steel crankshaft;
b> Percussive sound: forged steel crankshaft tapping sound is
more ringing & echo is longer;
c> Material chemical analysis;
d> Product weight: casting iron crankshaft is lighter than
forged steel crankshaft(the density of casting iron is 7.2 &
7.8 for forged steel).
| Material | nodular cast iron QT800-6 |
| Strength of extension | ≥ 800 MPA |
| Elongation | ≥5.5% |
| Strike | ≥25 J/CM2 |
| Hardness(before strengthen) | HB250-310 |
| Hardness(after strengthen) | HRC46-52 |
CRANKSHAFT PRODUCING TECHNOLOGY:
* Casting & Quenching: Casting eliminate stress generated in the quenching, the casting having a high strength and wear resistance but also has the required plasticity and toughness.
* Mold: Cast iron mold casting stiffness and relative thin
overlying sand casting cooling speed, fine sand grain size, thus
significantly advances the casting dimaensional accuracy, density
surface quality, refinement extent and rate of grain ball, and can
be realised without riser casting.
* Surface nitriding: After nitriding treatment products with
excellent wear resistance, fatigue resistance corrosion resistance
and high temperature properties.
* Fillet Rolling: Maximum improvement of fatigue strength against
other technologies; Improvement of total indior runs out valve
after deep rolling by roll straightening.
Our company with the famous brand JTP, specilly deal with production, sales and trading of Japan heavy diesel controduction machinary engine overhaul parts.
The main products include : engine cylinder liner, piston, pin, pistion ring, head gasket, overhaul gasket kit, engine bearing, intake valve & exhaust valve, valve seat & guide, oil nozzle & plunger...At present, we have more than 300 kinds of engine models,.
| Machined for superior tolerance |
| Multi heat treatment stage |
| Nitrided surface for superme wearing resistence |
| Precision ground, micro polished, balanced&magnaflued |
| Shot peened for improved fatigue life.etc.. |
MORE CRANKSHAFT SERIES:
| TOYOTA | |||||||||
| 1AZ | 13401-28010 | RAV4/Camry/Corolla | |||||||
| 3AZ | 13401-28030 | RAV4/Camry/Corolla | |||||||
| 1DZ | 13411-78201 | Forklift | |||||||
| 1FZ | |||||||||
| 1ZZ | 13401-22020 | Corolla | |||||||
| 3ZZ | 13401-22030 | Automobile | |||||||
| 4ZZ | 13401-22040 | Automobile | |||||||
| 1ZZ | 13411-78300 | Forklift | |||||||
| 2Z | 13411-78700 | Froklift | |||||||
| 11Z | 13411-78760 | Froklift | |||||||
| 12Z | 13411-78360 | Froklift | |||||||
| 13Z | Froklift | ||||||||
| 14Z | 13411-78780 | Froklift | |||||||
| B | 13401-56020 | Coaster | |||||||
| 2B | Automobile | ||||||||
| 3B | 13401-58010 | Coaster | |||||||
| 11B | 13401-58020 | Automobile | |||||||
| 13B | 13401-58018 | Cruiser | |||||||
| 14B | 13401-58030 | Automobile | |||||||
| 15B | Coaster | ||||||||
| 1C/2C | 13411-64908 | Avensis | |||||||
| 1E | 13400-10010 | Corolla | |||||||
| 2E | 13401-11050 | Automobile | |||||||
| 3E | 13401-11040 | Automobile | |||||||
| 4E | 13401-11051 | Automobile | |||||||
| 5E | Automobile | ||||||||
| 1HDT | 13411-17012 | Land Cruiser | |||||||
| 1HZ | 13411-17011 | Land Cruiser | |||||||
| 1KD | Land Cruiser/Hi-Lux | ||||||||
| 2KD | 13401-30020 | Hi-Lux/Hi-Ace/Dyna150 | |||||||
| 1KZ | 13401--30010 | Land Cruiser/491 | |||||||
| 1KZ-TE | Land Cruiser/Pardo | ||||||||
| 1RZ/2RZ | 13511-75010/13511-75020 | Hi-Ace/TCR/Tacoma | |||||||
| 1TR | 13401-75010 | Hi-Lux/ Innova | |||||||
| 2TR | 13401-75020 | Hi-Lux/ Innova/Forturner | |||||||
| 1Y/2Y | 13411-72010 | Forklift/Avensis/Carina/491Q | |||||||
| 3Y/4Y | 13411-73010 | Forklift/Avensis/Carina/491Q | |||||||
| 2J | 13411-96100 | Forklift | |||||||
| 2R | |||||||||
| 5R | 13411-44900 | ||||||||
| 12R | 13411-31902 | ||||||||
| 22R | 13411-38010 | ||||||||
| 2L | 13401-54040 | Hi-Lux2400 | |||||||
| 2LT | 13401-54021 | Hi-Lux2400 | |||||||
| 3L | 13401-54020/13401-54060 | Hi-Lux2400 | |||||||
| 5L | 13401-54061 | Hi-Lux2400 | |||||||
| 4A-FE | 13411-16900 | ||||||||
| 5A | 13411-15900 | ||||||||
| 7A | 13411-16903 | ||||||||
| 8A | 13401-75040 | ||||||||
| 3K/4K/5K | 13411-76006-71/13411-13900 | Liteace | |||||||
| 3P/4P | 13411-76001 | Forklift | |||||||
| 3RZ | 13411-75901 | ||||||||
| 3S | |||||||||
| 5S | 13401-74010 | Camry/Celica | |||||||
| |
Service | Drawings or samples processing/OEM/ODM service provided |
Produce Process | Drawings→ mould making → pre-forging →rough machining or finish machining →surface treatment →product checking → packing →delive ry |
Forging Material | Carbon Steel, Alloy steel,Stainless steel |
Standard | ISO, GB, ASTM, DIN, JIS |
Produce Equipment | Friction Screw Press Series, CNC Lathe, Machining Center (Vertical Spindles), CNC Milling Machine, Bench Drilling Machine, Heat Treatment Equipments and so on. |
Surface treatment | Heat treatment, Polishing, shot blasting, Painting, Electro-plating, Chemical Plating, |
Inspection Equipments | Metallurgical analysis , Tensile strength tester , Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc. |
FAQ:
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown
cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your
authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your
advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them,
no matter where they come from.
CRANKSHAFT PICTURE AS BELOW:
WELCOME YOUR ENQUIRY, WE WILL ALWAYS BE HERE SERVICE FOR YOU!
