Active Member
|
[China]
Address: RM 1302 13/7 CHEONG K BUILDING 84-86 DES VOEUX ROAD CENTRAL HK
Contact name:Martin
WESPC (HONGKONG) LIMITED |
|
|
VDO Oil Pressure Gauges 24VDC/12VDC 0-10 bar 52mm 0.5kgs G-003B 626-150 high quality for Diesel Generator
Oil Pressure Gauge 626-150
We also supply the following product:
626-150 VDO oil pressure gauge
626-151 VDO Oil pressure gauge
626-152 VDO Water temp gauge
626-153 VDO Water temp gauge
VDO oil pressure gauge
Model: VD-G-003B
Range: 0-10bar
Voltage:12V 24VDC
Size:Ø52
Weight:135G
Parameters for VDO Engine Oil Pressure Gauge:
Working Voltage for VDO Pressure Gauge: 12V or 24V
Pressure Range of VDO Genset Oil Pressure Gauge: 0-10.3 Bar (0-150 PSI)
Diameter of VDO Generator Pressure Sensor: 52mm
VDO Gauges:
VDO Oil Pressure Gauge (12V, 24V) : 0-10.3 Bar (0-150 PSI)
VDO Water Temp Gauge (12V, 24V) : 38-120 ℃
VDO Oil Temp Gauge (12V, 24V) : 50-150 ℃
VDO Voltage Gauge (12V, 24V) : 8-16V or 16-32V
VDO Hour Gauge (12V / 24V)
Examples for VDO Pressure Sensors
| Part No. | Range (Bar) | Alarm Position (Bar) | Thread Size | Thread Length (mm) |
| 360-081-030-001C | 5 | 0.25 ± 0.15 | M10 x 1 con. short | 19.5 |
| 360-081-030-001K | 5 | 0.25 ± 0.15 | M10 x 1 con. short | 19.5 |
| 360-081-030-008C | 5 | 0.5 ± 0.15 | M12 x 1.5 | 20.5 |
| 360-081-030-009C | 10 | 0.5 ± 0.15 | M10 x 1 con. short | 19.5 |
| 360-081-030-009K | 10 | 0.5 ± 0.15 | M10 x 1 con. short | 19.5 |
| 360-081-030-010C | 5 | 1.4 ± 0.3 | 1/8 – 27 NPTF | 19.5 |
| 360-081-030-014C | 5 | 0.6 ± 0.15 | M10 x 1 con. short | 19.5 |
| 360-081-030-015C | 10 | 0.8 ± 0.3 | 1/8 – 27 NPTF | 19.5 |
| 360-081-030-019C | 10 | 1.5 ± 0.15 | M12 x 1.5 | 20.5 |
| 360-081-030-030C | 10 | 0.7 ± 0.15 | M14 x 1.5 | 20.5 |
| 360-081-030-037C | 10 | 0.75 ± 0.2 | M18 x 1.5 | 20.5 |
Examples for VDO Temperature Sensor:
| Part No. | Range (℃) | Alarm Position (℃) | Thread Size |
| 323-803-001-025D | 120 | 103 ± 3 | 1/2 - 14 NPTF |
| 325-805-003-003C | 120 | 3/8 - 18 NPTF | |
| 323-803-001-012D | 120 | 100 ± 3 | 5/8 - 18 NF-3 |
| 323-801-005-005D | 120 | M10*1.0 | |
| 323-801-010-003K | 150 | M12*1.5 | |
| 323-803-001-009D | 120 | 102 ± 3 | M14*1.5 |
| 323-803-001-007D | 120 | 110 ± 3 | M16*1.5 |
