|
Trade Verify
Address: Next to the Baozhan road, Yinzhou District, Ningbo (Tong Industrial Zone) china
Contact name:Michael
Ningbo haijiang machinery manufacturing co.,Ltd |
|
Verified Suppliers
|
|
|
nursery pots injection molding machine garden pots energy saving china for sale bonsai pots plastic production line cost
Configuring rational centralized lubrication, providing more
professional, better lubrication to make machine more cleaner.
Professional templates optimized design
Template by advanced finite element analysis software to optimize
design, high rigidity, high strength, to meet the rapid impact
conditions demand.
Powerful, friendly control system
Adopts professional controller and friendly interface, easy and
fast operation, with good reliability.
Professional plasticizing system
Suitable for different types of plastic raw material with
professional plasticizing and heating system, good plasticizing
performance.
High efficient powerful servo system optional
Power system adopts high pressure gear box and servo motor, rotary
encoder,pressure transducer and servo amplifier to get system
closed-loop control
The Injection Units
Short and forceful double-cylinder injection system is used to ensure the steady injection motion.The strain free fixed mold plate and screw assembly with optimized design help to reach better plasticing capacity and effect. PID temperature control regulate the speed and pressure of injection, pressure keeping, smelting, back pressure and other motions to ensure the quality of formed products and continuation of production.Auto material preparation, drooling proof,and anti cold start lapse functions ensure the high efficent,simple and safe operations.
High efficiency, Energy-saving and high precise proportional
pressure and flow variable displacement pump system make the out of
the hydraulic system matching the required power for entire machine
operation without loss of high pressure throttle and overflow
energy. As comparedwith constant displacement pump, t saves power
by 30%~60%.A motor with same power may be fitted with an oil pump
of bigger displacement and thus accelerates the speed of
machine.Besides, the low oil temperature will prolong the service
life of sealing elements.
Buffer device is used in every mold opening and clamping oil way to
ensure steady mold opening and clamping operation without any
impact.Besides, differential mold clamping operation is fitted to
ensure high production efficiency.
Low noise
Different from ordinary fixed pump injection molding machine, servo
power-saving injection molding machine is working only when
necessary. And working noise is less than LOG-A8 series, will be
much quieter for your working area.
| SPECIFICATION | HJF-240 | |||
| A | B | C | ||
| Screw Diameter | Mm | 50 | 55 | 60 |
| Screw L/D Ration | L/D | 22.2 | 20 | 18.2 |
| Shot Size(Theoretical) | cm3 | 508 | 593 | 706 |
| Injection Weight(PS) | g | 462 | 534 | 642 |
| Injection Rate | g/s | 148 | 179 | 202 |
| Injection Pressure | MPa | 180 | 160.8 | 128 |
| Screw Speed | rpm | 0~180 | ||
| Clamp tonnage | KN | 2400 | ||
| Opening stroke | Mm | 490 | ||
| Space Between Tie Bars | mm | 530*510 | ||
| Max.Mold Height | mm | 530 | ||
| Min.Mold Height | mm | 200 | ||
| Ejector Stroke | mm | 165 | ||
| Ejector Tonnage | KN | 70 | ||
| Max.Pump Pressure | MPa | 16 | ||
| Pump Motor Power | KW | 18.5 | ||
| Heater power | KW | 11.65 | ||
| Machine Dimension(L*W*H) | M | 5.4*1.5*2 | ||
| Machine weight | T | 7 | ||
| Oil Tank Capacity | L | 340 | ||
