|
Trade Verify
Address: Next to the Baozhan road, Yinzhou District, Ningbo (Tong Industrial Zone) china
Contact name:Michael
Ningbo haijiang machinery manufacturing co.,Ltd |
|
Verified Suppliers
|
|
|
■ Computer Controller PLC
Professional injection moulding machine controller with software
and hardware of industrial standard is convenient to expansion and
revision of performance.
Adopting double CPU control makes high speed.
Mainly adopting PID control, the control accuracy reaches±1°.
Has the function of network management, improving efficency.
■ The Mould Adjusting Units
The automatic mold adjusting device driven by hydraulic motor
adopts gear coupling drive, features steadiness, high-efficiency
and saving mold loading time.
Characteristic
The machine use the high-performance servo dynamic control system,
the oil pump as the power source, having the characteristics as
follow: high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
High Energy saving
Under the ideal working state, Power consumption is 40% less than
that of variable displacement pump and 70% less than that of fixed
displacement pump, save the cost effectively.
High precision
Precise control of low pressure & low flow, repeating precision
is less than 0.5%. Weight error of the products is 0.4%~0.7%, with
semi-close loop system nearly.
Low noise
Different from ordinary fixed pump injection molding machine, servo
power-saving injection molding machine is working only when
necessary. And working noise is less than 70dB, will be much
quieter for your working area.
| SPECIFICATION | HJF-140 | |||
| A | B | C | ||
| Screw Diameter | Mm | 38 | 42 | 45 |
| Screw L/D Ration | L/D | 22.1 | 21.6 | 19.5 |
| Shot Size(Theoretical) | cm3 | 193 | 227 | 278 |
| Injection Weight(PS) | g | 176 | 206 | 252 |
| Injection Rate | g/s | 94 | 105 | 135 |
| Injection Pressure | MPa | 205 | 159 | 140 |
| Screw Speed | rpm | 0~220 | ||
| Clamp tonnage | KN | 1400 | ||
| Opening stroke | mm | 380 | ||
| Space Between Tie Bars | mm | 420*420 | ||
| Max.Mold Height | mm | 450 | ||
| Min.Mold Height | mm | 170 | ||
| Ejector Stroke | mm | 120 | ||
| Ejector Tonnage | KN | 33 | ||
| Max.Pump Pressure | MPa | 16 | ||
| Pump Motor Power | KW | 13 | ||
| Heater power | KW | 7.2 | ||
| Machine Dimension(L*W*H) | M | 4.5*1.2*1.7 | ||
| Machine weight | T | 4.2 | ||
| Oil Tank Capacity | L | 230 | ||
Hardened steel: Typically the most expensive material to use for a
mold, and generally the longest-lasting (which can drive down price
per unit). This makes hardened steel a good material choice for
products where multiple hundreds of thousands are to be produced.
Prehardened steel: Does not last as many cycles as hardened steel,
and is less expensive to create.
Aluminum: Most commonly used for single cavity "Prototype Tooling"
when a relatively low number of parts are needed for testing. Once
the injection molded parts from this tool are tested and approved,
then a multi cavity steel production tool is produced. It is
possible to get many thousands of parts from an aluminum tool but
typically it is used for lower quantities.
