Design is one of the most important facets of the production
process because it’s the earliest opportunity to prevent expensive
mistakes later on. (Of course, determining whether you have a good
idea in the first place is also important, but more on that here.)
There are many objectives to design for: function, aesthetics,
manufacturability, assembly, etc. The right design is one that
accomplishes the required objectives to a satisfactory level, but
it may take a lot of creativity to get there. Product design is
most often accomplished with computer aided design (CAD) software,
like SolidWorks. (Click here for nine pro tips on how to best use
SolidWorks in design and engineering.) Proficiency with CAD
software is vital because it allows for quicker iterations and more
accurate prototyping if necessary.
Some specific ways to avoid costly mistakes during the product
design process are to plan for uniform wall thickness whenever
possible, and to gradually transition from one thickness to another
when changes in thickness are not avoidable. It is also important
to avoid building stress into the design, such as corners that are
90 degrees or less. (Read more about Injection Molding Defects
here.)
SPECIFICATION | HJF-140 |
| A | B | C |
Screw Diameter | Mm | 38 | 42 | 45 |
Screw L/D Ration | L/D | 22.1 | 21.6 | 19.5 |
Shot Size(Theoretical) | cm3 | 193 | 227 | 278 |
Injection Weight(PS) | g | 176 | 206 | 252 |
Injection Rate | g/s | 94 | 105 | 135 |
Injection Pressure | MPa | 205 | 159 | 140 |
Screw Speed | rpm | 0~220 |
Clamp tonnage | KN | 1400 |
Opening stroke | mm | 380 |
Space Between Tie Bars | mm | 420*420 |
Max.Mold Height | mm | 450 |
Min.Mold Height | mm | 170 |
Ejector Stroke | mm | 120 |
Ejector Tonnage | KN | 33 |
Max.Pump Pressure | MPa | 16 |
Pump Motor Power | KW | 13 |
Heater power | KW | 7.2 |
Machine Dimension(L*W*H) | M | 4.5*1.2*1.7 |
Machine weight | T | 4.2 |
Oil Tank Capacity | L | 230 |
Characteristic
The machine use the high-performance servo dynamic control system,
the oil pump as the power source, having the characteristics as
follow: high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
High Energy saving
Under the ideal working state, Power consumption is 40% less than
that of variable displacement pump and 70% less than that of fixed
displacement pump, save the cost effectively.
High precision
Precise control of low pressure & low flow, repeating precision
is less than 0.5%. Weight error of the products is 0.4%~0.7%, with
semi-close loop system nearly.
Low noise
Different from ordinary fixed pump injection molding machine, servo
power-saving injection molding machine is working only when
necessary. And working noise is less than 70dB, will be much
quieter for your working area.