Godson Technology Co., Ltd |
Verified Suppliers
|
|
Plastic Right Non - Illuminated LED Emergency Twin Spot Light 3W
6500K
Technical Specifications
Model | GS-1098 |
Size | 269*63*263mm |
Power | 2*3W |
Voltage | AC85-265V-50/60Hz |
Emergency time | ≥ 3h |
Battery | lithium battery/Ni-CD/Ni-MH |
CCT | 6500 K |
Lanp Luminous Flux | 600Lm |
Protection Class | Class Ⅱ |
Operating Temperature | 0-40 ℃ |
An LED Emergency Twin Spot Light is a type of emergency lighting
fixture that utilizes LED technology. It is designed to provide
illumination during power outages or emergencies. Here are some key
features and characteristics of LED Emergency Twin Spot Lights:
1.LED Technology: LED (Light Emitting Diode) lights are
energy-efficient and have a longer lifespan compared to traditional
lighting sources. They provide bright and reliable illumination.
2.Twin Spot Design: The "twin spot" refers to the presence of two
separate light heads or lamps in the fixture. This design allows
for broader coverage and flexibility in directing the light.
3.Battery Backup: LED Emergency Twin Spot Lights typically have
built-in rechargeable batteries that automatically activate when
the main power supply fails. These batteries provide power to the
LEDs, ensuring continuous illumination during emergencies.
4.Adjustable Heads: The light heads of twin spot lights are often
adjustable, allowing users to pivot or rotate them to direct the
light where it is needed most.
5.Mounting Options: These lights can be mounted on walls, ceilings,
or other suitable surfaces, depending on the specific model and
installation requirements.
6.Duration of Operation: The duration of operation during an
emergency can vary depending on the battery capacity and power
consumption of the LED lights. It is important to consider the
expected runtime and ensure that it meets the required standards
and regulations.
Where should emergency lighting be installed?
Emergency lighting should be installed in key areas of a building
to ensure the safety of occupants during power outages or
emergencies. The specific locations where emergency lighting should
be installed include:
1.Exit Routes: Emergency lighting should be installed along escape
routes, such as corridors, stairwells, and hallways, leading to the
nearest exits.
2.Exit Doors: Illumination should be provided around exit doors to
ensure their visibility and facilitate a safe evacuation.
3.Change of Direction: Emergency lighting should be placed at
changes in direction along escape routes to guide people toward the
correct path.
4.Intersections: Lighting should be installed at intersections or
branching points to assist in determining the correct route during
an evacuation.
5.High-Risk Areas: Areas with potential hazards or critical
equipment, such as machinery rooms, electrical panels, and chemical
storage areas, should have emergency lighting to allow for safe
operations or shutdown procedures.
6.Assembly Points: Outdoor areas designated as assembly points for
evacuees should have proper lighting to aid in gathering and
accounting for individuals during emergencies.