|
[China]
Trade Verify
Address: Unit 103B (Main Building), Building 4, No. 29 North Pier Road, Huang Pu Village, Haizhu District, Guangzhou, Guangdong, China ,510330
Contact name:Paul Huang
Godson Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Rechargeable Polymer Lithium Ion Battery 401020 55mAh 3.7Volt
Product Parameters
| Pos. | Product Parameters | Data |
| 1 | Type | Li-polymer Battery |
| 2 | Nominal capacity | 55mAh |
| 4 | Norminal voltage | 3.7V |
| 5 | Charging Temperature | 0℃-45℃ |
| 6 | Discharging Temperature | -20℃- +60℃ |
| 7 | Storgy Temperature | -20℃- +45℃ |
Li-polymer Battery List
| Type | Max Thickness (mm) | Max Width (mm) | Max Length (mm) | Voltage (V) | Capacity (mAh) | Weight (g) |
| Li-P401017 | 4.2 | 10.5 | 17.5 | 3.7 | 40 | 1.5 |
| Li-P401020 | 4.2 | 10.5 | 20.5 | 3.7 | 50 | 1.5 |
| Li-P401215 | 4.2 | 12.5 | 15.5 | 3.7 | 40 | 1.5 |
| Li-P401230 | 4.2 | 12.5 | 30.5 | 3.7 | 120 | 4.0 |
| Li-P401225 | 4.2 | 12.5 | 25.5 | 3.7 | 90 | 3.3 |
| Li-P401525 | 4.2 | 15.5 | 25.5 | 3.7 | 110 | 3.7 |
| Li-P402025 | 4.2 | 20.5 | 25.5 | 3.7 | 150 | 4.5 |
| Li-P402030 | 4.2 | 20.5 | 30.5 | 3.7 | 200 | 5.8 |
| Li-P431223 | 4.5 | 12.5 | 23.5 | 3.7 | 70 | 2.8 |
| Li-P457585 | 4.2 | 75.5 | 85.5 | 3.7 | 3000 | 48.0 |
| Li-P483030 | 5.0 | 30.5 | 30.5 | 3.7 | 380 | 6.6 |
| Li-P501230 | 5.2 | 12.5 | 30.5 | 3.7 | 130 | 4.2 |
| Li-P502030 | 5.2 | 20.5 | 30.5 | 3.7 | 250 | 6.0 |
| Li-P503030 | 5.2 | 30.5 | 30.5 | 3.7 | 430 | 8.7 |
| Li-P503040 | 5.2 | 30.5 | 40.5 | 3.7 | 550 | 12.5 |
| Li-P503048 | 5.2 | 30.5 | 48.5 | 3.7 | 700 | 13.6 |
| Li-P503759 | 5.2 | 37.5 | 59.5 | 3.7 | 1200 | 24.0 |
| Li-P505062 | 5.2 | 50.5 | 62.5 | 3.7 | 2000 | 35.0 |
| Li-P505573 | 5.2 | 55.5 | 73.5 | 3.7 | 2500 | 40.0 |
| Li-P552035 | 5.7 | 20.5 | 35.5 | 3.7 | 350 | 6.5 |
| Li-P552535 | 5.7 | 25.5 | 35.5 | 3.7 | 450 | 10.0 |
| Li-P552730 | 5.7 | 27.5 | 30.5 | 3.7 | 380 | 6.6 |
Product performance:
1. Good safety performance. Built in circuit protection board, with short circuit, overcharge,over discharge, shock, vibration, acupuncture, high temperature,no explosion ,etc.
2. Stable performance. Long cycle life, after 500 times of ontinuous charge and discharge,the battery capacity shall not be less than 80% of the rated capacity.
3. Small thickness and high volume utilization. Polymer lithium battery overcomes Lithium battery in the thickness of the bottleneck, to achieve ultra-thin settings, and can assemble it into a credit card. Polymer cell can achieve thickness up to less than 1 mm, in line with the current demand for mobile phones.
4. Shape can be customized. Polymer lithium battery models and capacities are available,it has strong applicability.
5. No memory effect. It can be charged and discharged at any time.
6. Shape can be customized. Polymer lithium battery models and capacities are available,it has strong applicability.
7. No memory effect. It can be charged and discharged at any time.
Application :
1.lighting, backup power supply, wind energy storage, communication
equipment, IT products, IC card terminal, GPS system, LED lights,
medical equipment,instrumentation, beauty and hair products,
electric toys, flashlight, miner's lamp, agricultural machinery
equipment, electric tools, etc.
2.Mobile phones, tablets, Bluetooth earphone, smart watches and other
smart wearable devices, GPS, electric toys, beauty instruments,
aromatherapy machines, LED lights, quad copters, drones ,etc.
Lithium Battery Cell Model
Voltage of single cell of lithium battery is 3.7V, but Ni-MH and Ni-Cd is only 1.2V, which means one lithium battery cell could replace three Ni-MH or Ni-Cd cells. Therefore, lithium battery pack has much smaller size than Ni-MH and Ni-Cd battery pack.
Self-discharge rate of lithium battery is 5% per month, which is much lower than Ni-MH and Ni-Cd (25% per month). Lithium battery has around 800 times of cycle life, which is also longer than Ni-MH and Ni-Cd(500 times). So lithium battery is replacing Ni-MH and Ni-Cd in more and more fields.
Performance Curves of Lithium Cell:
1.Lithium Cell Charge Curve (Charge at 1C)
2. Lithium Cell Discharge Curve (Discharge at 1C )
3. Lithium Cell Cycle Life Curve
Conductive Coating of Lithium Battery
A conductive coating is called pre coating, in the Lithium Battery
industry usually coated on the surface of the anode current
collector foil, a layer of conductive coating, coated with a
conductive coating of aluminum foil is called pre coated aluminum
foil or aluminum foil coating, the first experiment in the battery
can be traced back to 70s, in recent years, with the new energy
industry. Especially the lithium iron phosphate battery development
fast, which becomes the hottest new technology and new materials.
The conductive coating can effectively increase the adhesion of the polar plate, reduce the usage of the binder and improve the electrical performance of the battery.
