|
[China]
Trade Verify
Address: Unit 103B (Main Building), Building 4, No. 29 North Pier Road, Huang Pu Village, Haizhu District, Guangzhou, Guangdong, China ,510330
Contact name:Paul Huang
Godson Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Customizable Manufacturer 3.6V 1600mAh Emergency Light Ni Cd
Battery
Application:
| Pos. | Application fields | Application of the product |
| 1 | Lighting | emergency lighting, emergency power supply, solar lights, searchlingts, flashlights |
| 2 | Power tools | electric drills, planers, saws, power granted |
| 3 | Electronic toys | remote control car, remote control boats, aircraft, model aircraft |
| 4 | Communication equipment | cordless phones, walkie-talkie |
| 5 | Other uses | electric shavers, massagers, electric tooth brush |
List Of Ni-CD High Temperature Cells
| Type | Model | Diemeter (mm) | Height (mm) | Capacity (mAh) | Voltage (V) | Operating Temperature (°C) |
| SC | GS-4/5SC120T | 23.0 +0 -1.0 | 33.5±0.5 | 1200 | 1.2 | -20 to 70 |
| GS-SC120T | 23.0 +0 -1.0 | 42.5±0.5 | 1200 | 1.2 | -20 to 70 | |
| GS-SC120 | 23.0 +0 -1.0 | 42.5±0.5 | 1200 | 1.2 | -20 to 55 | |
| GS-SC130T | 23.0 +0 -1.0 | 42.5±0.5 | 1300 | 1.2 | -20 to 70 | |
| GS-SC130 | 23.0 +0 -1.0 | 42.5±0.5 | 1300 | 1.2 | -20 to 55 | |
| GS-SC140T | 23.0 +0 -1.0 | 42.5±0.5 | 1400 | 1.2 | -20 to 70 | |
| GS-SC140 | 23.0 +0 -1.0 | 42.5±0.5 | 1400 | 1.2 | -20 to 55 | |
| GS-SC150T | 23.0 +0 -1.0 | 42.5±0.5 | 1500 | 1.2 | -20 to 70 | |
| GS-SC150 | 23.0 +0 -1.0 | 42.5±0.5 | 1500 | 1.2 | -20 to 55 | |
| GS-SC160T | 23.0 +0 -1.0 | 42.5±0.5 | 1600 | 1.2 | -20 to 70 | |
| GS-SC160 | 23.0 +0 -1.0 | 42.5±0.5 | 1600 | 1.2 | -20 to 55 | |
| GS-SC170T | 23.0 +0 -1.0 | 42.5±0.6 | 1700 | 1.2 | -20 to 70 | |
| GS-SC170 | 23.0 +0 -1.0 | 42.5±0.6 | 1700 | 1.2 | -20 to 55 | |
| GS-SC180T | 23.0 +0 -1.0 | 42.5±0.5 | 1800 | 1.2 | -20 to 70 | |
| GS-SC180 | 23.0 +0 -1.0 | 42.5±0.5 | 1800 | 1.2 | -20 to 55 | |
| GS-SC190T | 23.0 +0 -1.0 | 42.5±0.5 | 1900 | 1.2 | -20 to 70 | |
| GS-SC190 | 23.0 +0 -1.0 | 42.5±0.5 | 1900 | 1.2 | -20 to 55 |
Product parameters:
Standard Charge Mode: 0.1C for 16 hours
Cycle Life: ≥500 times
Operating Temperature: (-20℃) - (+70℃)
Storage Temperature: (-30℃) - (+60℃)
Cell Dimension: 23 +0 -1.0(D), 42.5±0.5(H)
Cell Weight: ≈48g
Expected Life: 5 years
Packaging: Standard export package or customized package
Product performance:
1.Ni-Cd battery has high charge and discharge efficiency and good safety performance at high temperature and has long service life under condition of long term floating charge, which makes it very suitable for emergency lighting application.
2.Working temperature for Ni-Cd battery could be up to 55 degree, and even up to 70 degree, and expected service life could be up to 4 to 5 years.
3. Wide range temperature adaptability.Ordinary nickel cadmium batteries can be used in high or low temperature environment. High temperature batteries can be used at temperatures of 70 degrees Celsius or higher.
4. Reliable safety valve. The safety valve provides maintenance free function. Nickel cadmium battery can be used freely in the process of charge discharge or storage. Due to the special material used in the sealing ring and the effect of sealant, the leakage phenomenon of Ni Cd battery is rare.
Advantages of Ni-Cad Batteries:
Operating temperature range of -4 - 158°F
No sulfation associated with nickel cadmium (Ni-Cd) batteries
No shedding/loss of plate material
The best battery available for abusive or harsh environments
Low internal resistance
High rate charge and discharge rates are possible
Up to 10C discharge rates for short periods typical
Flat discharge characteristic (but falls off rapidly at the end of the cycle)
Tolerates deep discharges - can be deep cycled
Ni-Cd Battery Cell Performance:
1. Ni-Cd Cell Charge Curve At 0.1C For 16h At 55 Degree
2. Ni-Cd Cell Discharge Curve At 0.25C At 55 Degree
3. Ni-Cd Cell Charge Efficiency At Different Temperature
4. Ni-Cd Cell Capacity Change At Permanent Charge At 55 Degree (0.05C Floating)
5. Ni-Cd Cell Cycle Life Curve
Replacing batteries in self-contained emergency lighting is crucial for ensuring its functionality during power outages or emergencies.
Here's a general guide on how to replace these batteries:
1.Safety Precautions: Before starting, ensure the power to the unit is off. If it's connected to the mains, switch off the circuit breaker or disconnect the power source to avoid electric shock.
2.Access the Battery Compartment: Depending on the model, you may
need to remove a cover or open a compartment to access the
batteries. Refer to the manufacturer's instructions for your
specific model.
3.Remove Old Batteries: Carefully remove the old batteries from the
compartment. Pay attention to their orientation, noting which end
is positive (+) and which is negative (-).
4.Dispose of Old Batteries: Properly dispose of the old batteries
according to local regulations. Most communities have battery
recycling programs to handle old batteries safely.
5.Select Replacement Batteries: Choose replacement batteries that
match the specifications of the original ones. This includes the
correct voltage, capacity, and size. Using incompatible batteries
can damage the device or cause it to malfunction.
6.Install New Batteries: Insert the new batteries into the
compartment, ensuring they are oriented correctly with the positive
and negative terminals aligned properly.
7.Close the Compartment: Securely close the battery compartment or
replace the cover, ensuring it is properly sealed to prevent
moisture or dust from entering.
8.Test the Unit: After replacing the batteries, turn the power back
on and test the emergency lighting to ensure it functions
correctly. This may involve performing a manual test or waiting for
an automatic test cycle, depending on the unit.
9.Regular Maintenance: Periodically inspect the emergency lighting
system to ensure it is in good working condition. Replace batteries
as needed and keep the unit clean and free of debris.
10.Document the Replacement: Keep a record of when the batteries
were replaced and any other maintenance tasks performed on the
emergency lighting system. This helps track its performance and
ensures timely replacements in the future.
