|
[China]
Trade Verify
Address: Room119,Building 40,Of International Agriculture Plaza,Luoxing Street,Jiashan Country,Zhejiang,China
Contact name:Cathy
Jiaxing Kenyue Medical Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Home Electric Nursing Bed With Bedpan Detachable Wheelchair White
Ⅰ. Introduction
In order to alleviate the patient's long-term physical pain and psychological stress caused by failure of self-care, and improve patient self-confidence, we have improved on the basis of multi-functional nursing bed to design some more humanized "multi-functional wheelchair care bed". We combined the function of wheelchair with nursing bed. The wheelchair can be separated from the nursing bed on the basis of functions such as raising and lowering of backrest and leg rest, etc. This increase the activity space of patients, which relieve the pressure of care.
Ⅱ. Applying Group
Mainly used for patients with hemiplegia, muscle weakness, low and medium degree spinal cord injury, fractures, burns, hyposthenia and other reasons that can not be independently self-care.
Ⅲ. Specifications
1. Product Name: Multifunctional wheelchair care bed
2. Product size:
3. Product model: Electric type I Electric type II
4. Product materials: cold rolled steel
5. Controller technical indicators
| Model | JCHR35F | Power | AC220V 1.5A |
| Output power | DC29V 4A | Rated load | DC24V 6000N |
| Distance of back raising | 200MM | Distance of leg lifting | 180MM |
6.Specifications of Functions:
| Functions | Back raising angle | Leg raising angle | Leg lowering angle | Casters rotation angle |
| specification | 85° | 30° | 55° | 360° |
7.Packing List
| Head board | 1 pair | mattress | 1 |
| Casters for bed | 4 | Casters for wheelchair | 4 |
| Side rails | 1 pair | Dining table | 1 |
| motor(include controller) | 1 set | Wheelchair armrest | 1 set |
| Operation manual | 1 | IV pole | 1 |
| commode | 1 | Warranty card | 1 |
Diagram of wheelchair nursing bed controller
1. Install bed casters
Adjust the height of casters to make the bed and wheelchair in the same level.
2. Reset motor
Turn on the motor and electromagnetic lock power, and press S1, S2 and wireless receiver button for 3 seconds to complete the reset.
Reset functions:
After the system is powered on for the first time, the system needs to be reset.
In the system reset state, press S1 or S2, M1, M2 fall to the end, the reset is completed. In the system reset state, when the other buttons are pressed, the buzzer will beep, and when released, the buzzer will stop beeping.
Entering the reset state: When the M1 is in the 5mm position, press and hold the down button for 5 seconds, the buzzer will beep and the system will enter the reset state.
3. How to separate the wheelchair
Step 1: Turn on the safety lock and keep it on.
Step 2: When the safety lock is on, press the back raising button in the remote control until up to the proper angle.
Step 3: Turn on the electromagnetic lock button and the wheelchair will be pushed out.
4. Common functions
S1:M1 rise S2:M1 down
(M1 down to 20mm, automatically down to the end, rises to 5mm)
S3:M2 rise S4:M2 down
S5:M3 rise S6:M3 down
Ⅵ. Overheat and Overcurrent Protection
Protection current: 6-7A
Overheat protection value: 75 ° C
Overheat protection recovery value: 45 ° C
Ⅶ. Charging and Discharging of Storage Battery
1. Charging function: Plug in the battery, after turning on the AC, if the battery voltage is not full (ie less than 29V), the battery enters the charging state. If the battery in the previous state is full, the voltage needs to be lower than 23.5V to start charging. After charging for a few minutes, test the voltage across the battery and the voltage should be high. When the battery is full, the voltage of the LM317 is “0V”.
2. Discharging functions
Turn off the AC power, operate any button, the corresponding motor will be run; when it is reduced to about 20V ± 1V, turn off the battery discharge function.
Ⅷ. Operation Methods
1. Back raising function
Method 1: The bed is not in the turned-over state, press S1, the back frame rises; press S2, the back frame descends and returns to the horizontal position.
2. leg raising and lowering function
When the bed is not in the overturned state, press S3 to raise the leg; press S4 to lower the leg.
In the state of lowering legs, it is more convenient to separate the wheelchair to have meal and walk around.
3. Commode function
Push the wheelchair over the toilet and press the S5 key to open the hole. After excretion, the S6 button is used to close the hole.
4. Separation operation of bed and wheelchair
Step 1: Turn on the safety lock and keep it on.
Step 2: When the safety lock is on, press the back raising button in the remote control until it up to the proper angle.
Step 3: Turn on the electromagnetic lock button and the wheelchair will be pushed out.
Ⅸ. Warning
1. It is strictly forbidden to plug and unplug the connecting cables to avoid damage to the control system.
2. When the battery of the remote control is low, the motor may not run smoothly.
3. The height of the wheelchair can be adjusted by the casters (the height can be adjusted so that the wheelchair is substantially parallel to the bed).
4. When the wheelchair is pushed into the bed, the wheelchair armrest must be removed.
Ⅹ. Maintenance
1. When the product is not in use, be sure to turn off the power.
2. Keep the product dry and ventilated.
3. Regularly check the parts of the nut, hinge pin and side rail on each part to prevent loosening.
4. The frame is made from cold-rolled steel and through powder coating. Do not scratch the surface with hard materials. Do not use acid-base corrosive solvents for cleaning. Use neutral detergent to clean.
Ⅺ. After-sale Service
1. 5 years free warranty for the bed frame, life-long maintenance.
2. 1 year free warranty for the motor, life-long maintenance.
3. 1 year free warranty for headboard, roller bumper, casters, side rail, lifetime maintenance.
No notice you if there are any technical improvements and local structural adjustments.
Jiaxing Greatmicro Medical Equipment Co., Ltd. is located in Jiaxing City, the Yangtze River Delta Economic
Circle, with a developed economy and convenient transportation. Our
factory combines the manufacturing, sales, service and support of
the most innovative hospital furniture solutions, managed by a
professional team with extensive management experience and business
acumen in various
fields, and is a leading provider of highly specialized medical
equipment and equipment Products, such as electric and manual
hospital beds, orthopedic traction beds, examination beds, infusion
chairs, accompany chairs, hospital trolleys, stretchers and
stretcher trolleys, have passed ISO9001: CE certification. In
addition to all these certificates, we are also committed to
providing customers with a one-stop sales model, and we pay more
attention to customer satisfaction, which is the basis for making
our products popular on a global scale. So far, more than 60
countries and regions have enjoyed our products and services. Our
success is mainly achieved by following the firm commitment to the
corporate philosophy of "integrity-based, customer first". Our
vision is to provide world-class products and services to improve
the global medical system to the highest level.
We have a professional team:
1. A professional team of engineers to ensure high quality products
and provide professional product customization services.
2. The professional material procurement team reduces the cost of
products and provides our products with competitiveness.
3. Professional business team to ensure smooth communication to
bring you a good experience.
4. Professional document clerk and merchandiser team to ensure the
smooth delivery of products.
Our products have been exporting to Europe,North America,South
America,Middle East of Asia, India, indonesia, Egypt, Algeria,
Sudan, Africa,Saudi Araba, etc. Also we could offer OEM/ODM
manufacturing as customers prefer.
Q: Where is your factory?
A: Jiaxing City, Zhejiang
province, China. 2hours from Shanghai.
