Custom Aluminum Handrail Profile Stair Handrail Wood Grain Railing Profile Oval Aluminum Tube

Custom Aluminum Handrail Profile Stair Handrail Wood Grain Railing Profile Oval Aluminum Tube

 
Basic Information

Aluminum profile is now a very widely used profile in the market. It can process the natural aluminum profile into various colors through various processing techniques to meet the needs of use. In the use of aluminum profiles, some of them will also turn white at the ends, so how to deal with the following Jiangyin aluminum profiles Longkang Aluminum Industry will introduce you in detail. If dark lines appear in the pretreatment process, you can try to control the time of the three washings after alkaline etching to 3-5 seconds, and control the water control time to 2-5 seconds in the air; the temperature of the alkaline etching tank is controlled at 45-55 degrees Celsius, and the alkali In addition to installing heating pipes, cold water pipes should be installed in the etching tank; on the premise of ensuring good contact between the aluminum profile and the conductive rod, the tank liquid should be controlled at 50-80 cubic meters; the aluminum profile nickel salt coloring tank should be equipped with a regeneration refining device, using The cation exchanger reduces the ion mass concentration, and the exchanger resin should be regenerated in time when the refining device does not work. In addition, between the conductive beam and the conductive rod, between the conductive rod and the aluminum profile, it should be polished with a wire brush to be free of debris, and then fastened well, and the position of the aluminum profile should not exceed 30mm from the end. After neutralization, the aluminum profile and the conductive rod must be fastened before the aluminum profile is oxidized. Try to use low current density or low voltage for aluminum profile oxidation. The general control current is 100-120A/m2, and the voltage is 14-16V.

 
Product Display

  
Certificates and Honors
 

 

 
Company Profile
 
Jiangyin Longkang Metal Products Co., Ltd. is located in Zhouzhuang Town, Jiangyin City - the largest aluminum extrusion profile production base. Covering an area of more than 35,000 square meters with more than 350 employees. We focus on metal customization, special-shaped aluminum profiles, aluminum profiles, aluminum tubes, rail transit series, doors and windows aluminum profiles, heat sinks, CNC processed aluminum profiles, interior decoration series, bending series, etc. We also have precision anodizing and various surface treatments, such as PVC film, wood grain, electrophoresis, powder coating, anodizing, etc. After more than 20 years of development, The company has become a modern aluminum production enterprise with perfect quality management system.

Efficiently treating our customers as partners with sincerity, specialization and satisfaction is our managerial principle. Attributed to the backup of a dedicated technical team, filled with wide and profound knowledge and practice in aluminum profile and world trade for 20 years, the company owns rich experience in product quality control and profile physical properties such as Hardness, Stretchability, Flatness, Straightness, and Tolerance etc. In line with the principle of sharing the preferential cost and joint development, the company has formed an interest community for years with its customers at home and abroad. Sincerely to build up a pleasant mutual trust, cooperative, win-win and value-added sustainable partnership is what we are achieving to grow together with you!
 
The company has the ability to develop and design molds independently, we can produce any extruded aluminum profiles according to your mechanical drawing or sample. Longkang has 10 extrusion production lines (600-3500 tons), one automatic oxidation electrophoresis production line, vertical and horizontal spraying production line per each, and a variety of advanced supporting production, processing and testing equipments. There are also CNT digital control drilling and milling machine(CNC), double head saw, hydraulic saw and punching machine in our processing workshop. The complete technological process can benefit to reduce the production turnover times for semi-finished products, to avoid the damage during transportation, improve the production efficiency, reduce the cost of production,and to ensure the quality and delivery time.

Factory display


 

FAQ
  

Q: How to place an order?
A: First let us know your requirement or application.
Secondly, we quote according to your request or our suggestion.
Third, the customer confirms the sample and makes a deposit for the formal order.
Finally we arrange production.

Q: Are all color products the same finish?
A: No. With powder coatings, bright colors will be higher than white or gray. Regarding the price of anodizing, the color will be higher than the silver, and the black will be higher than the color.