Home Companies SHANGHAI SUNNY ELEVATOR CO.,LTD

Elevator Compensating Cables Roller Guidance System For High Speed Applications

SHANGHAI SUNNY ELEVATOR CO.,LTD

Contact Us

[China] country

Trade Verify

Address: 5 Floor, Building 26, No. 1555 West Jinshajiang Road, Jiading District, Shanghai

Contact name:Wei CHEN

Inquir Now

SHANGHAI SUNNY ELEVATOR CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Elevator Compensating Cables Roller Guidance System For High Speed Applications

Country/Region china
City & Province shanghai shanghai
InquireNow

Product Details

Compensating Cables Roller Guidance System For High Speed Applications

The Weight Compensating Cable QuietLink II

Coated with PVC, the QuietLink II Cable serves to compensate for the weight of the traction ropes while the car moves up and down the shaft.

The QuietLink II Cable has proven itself as a truly quiet compensating product with a larger and more uniform loop than bare chains or chains with a sash cord.

Construction

Cable – Low carbon, welded proof coil chain
Jacket – A high-quality polyvinyl chloride (PVC) adds mass and forms a round cross-section.

Application

This round filled configuration is designed for use at speeds of up to 3.5m/s.

Roller Guidance System for High Speed Applications

For elevator speeds over 350 ft/min and up to 490 ft/min (1.75 m/sec to 3.5 m/sec), a roller guidance system must be used with QuietLink II to dampen cable oscillations and prevent the cable from swaying. These rollers also help to maintain the natural loop of the compensating cable.

Purpose

The purpose of the guide rollers is to maintain the loop diameter and prevent any swaying of the compensating cable during stops and starts. The polyurethane also helps to dampen any vibration which may be caused by sudden stops and starts or air movement in the elevator shaft.

Each installation hardware kit includes: 3 U-Bolt (includes nuts, and washers), 1 shackle, 1 heavy duty grip for safe and economical installation of Quitelink II compensating cable.

Installation Advice

This diagram shows the approximate placement of components for a Quietlink II cable installation.

Technical data

part-no.producttotal-weight [kg/m]cable-size [mm]diameter [mm]max. hang length [m]loopdiameter* [mm]
420112040QL0751,12624160610
420149040QL101,496,529160610
420223040QL152,24735130610
420298040QL202,98938160660
420372040QL253,731042180660
420446040QL304,471144180660
420521040QL355,221248150690
420595040QL405,961352150690

*measured from middle of the chain to middle of the chain

 

 

 

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.

 

 

Hot Products

Worm Gear Elevator Motor Traction Drive For Elevator Escalator Parts Product Characteristics Motor ...
Booster Power Board 230 V Escalator Gearboxes For Escalator Parts BRAKE SYSTEM Type V - Start / hold ...
Escalator Gearboxes Efficiency More Than 80% And Booster Power Board 230 V BRAKE SYSTEM Type V - ...
220/380V Passenger Gearless Lift Motor With Φ200mm Traction Wheel Dia Items Index Work duty S5-25% ...
DC110 Brake Operating Voltage Belt Gearless Elevator Machine For Passenger Lift Parts Items Index ...
Passenger Elevator Parts 3Kw 0.4m/S Gearless Motor Traction Machine Items Index Work duty S5-25% ...