Elevator Double Pulling Instantaneous Safety Gear For Passenger Lift

Elevator Double Pulling Instantaneous Safety Gear For Passenger Lift

This product is a progressive safety gear, butterly spring is used to ensure braking requirements, mainly for misubishi type capsules frame structure form of the development, design of a passenger elevator safety damp, use need to explicitly allow the system quality, guide rail top width, rated speed etc.
This product safety camp can adopt facade intallation form, insallation structure is compact and reasonable, flexible and reliable.

Under the control of the speed limiter, when the speed of the elevator exceeds thespeed set by the speed limiter,or in the case of suspension rope fracture andrelaxation, the car will stop and clamp a safety device on the guide rail. lt provideseffective protection for the safe operation of the elevator, generally installed in thecar frame or on the heavy frame;The safety clamp device consists of two major parts:control mechanism (safety clamp linkage mechanism) and braking mechanism(safety clamp).

Type	SN-SG-388
Rated speed	≤0.63m/s
Total permit system quality	≤12500kg
Matching guide rail	15.88/16mm
Pulling form	Double pulling

Type	SN-SG-588
Rated speed	≤0.63m/s
Total permit system quality	≤2500kg
Matching guide rail	19mm
Pulling form	Double pulling

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.