Slim Digital Signage Wall Mounted Passenger Elevator LCD Display DC24V

LCD Elevator Digital Signage Wall Mounted Monitor Advertising Players Android LCD Advertising Display

A new paradigm for the way building elevator trffi is assigned.The technology behind this system uses complex algorithms, but the passenger experience is quite simple: After selecting the desired floor on a touchscreen, passengers are directed to the elevator that will take them to their destination. I's just that simple. Destination based dispatching is intended to improve the efficiency of elevators in high traffic buildings.
Better efficiency is realized by assigning passengers with like destinations to specific cars. This results in each elevator making fewer stops, saving passenger time and allowing elevator cars to move more passengers over a shorter run time. An additional pleasant effect of passenger-to-car assignment is reduced confusion and less competition at the elevator bank entrances.

Name	Type	Configuration	Boundary Dimensions(mm)	Installation Dimensions(mm)
Dot-Matrix PI(Slim)	K-PI1000	One/lift/floor	60x140x13	50x130

Name	Type	Configuration	Boundary Dimensions(mm)	Installation Dimensions(mm)
Dot-Matrix PI(Slim)	K-PI1006	One/lift/floor	76x138x6	60x118

Name	Type	Configuration	Boundary Dimensions(mm)	Installation Dimensions(mm)
LCD Display(Horizontal/Vertical)	K-PI1100	One/lift/floor	160x61.5x11	142x44

Name	Type	Configuration	Boundary Dimensions(mm)	Installation Dimensions(mm)
LCD Display(Landing)	K-CAN03D	One/lift/floor	140x77x12	130x62

Name	Type	Configuration	Boundary Dimensions(mm)	Installation Dimensions(mm)
Slim LCD indicator(4.3 inch LCD screen)	K-03T	One/lift/floor	84x160x12	74x150

Name	Type	Configuration	Boundary Dimensions(mm)	Installation Dimensions(mm)
Slim LCD indicator(7 inch LCD screen)	K-06T	One/lift/floor	135x168x19	127x160

FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.