Corrosion Resistance Polypropylene Bag Filter Housing 1.0MPa For Electroplating

Single Bag #4 #5 Filter Housing Corrosion Resistance Bag Filter For Electroplating

Features:

1. The filter is formed in one piece, the structure is sturdy, safe and reliable, the installation is simple and convenient, there is no welding place, and it is economical and durable. PPH material can be used to filter most chemical liquids and has corrosion resistance to most chemicals.

2. The screw cap can be opened and closed freely, and the flange-type access interface avoids easy leakage and cracking. The filter bag and the filter barrel are in close contact, and any filter residue cannot penetrate the equipment.

3. It is convenient to replace the filter bag with different filtration accuracy.

4. Fluoroplastic rubber or silicone sealing ring, suitable for a wide range of acid-base and temperature liquids.

5. The polished barrel wall is convenient for manual cleaning or flushing at the appropriate location.

6. Four-hole mounting square base improves the ease of installation and strengthens the stability of the filter barrel.

7. The ring mouth of the filter bag is closely attached to the inner wall of the filter to effectively prevent the side leakage of the liquid.

Pleated filter cartridges: Filtration of different-sized elements in a limited amount relies on pleated cartridges. Such instruments apply to stream and river surface waters. The provided surface area of the item exceeds its diameter. The components are priced higher than the string wound or melt blown options and represent an optimal solution for sub-micron filtration. In biological blocks, their primary objective is sterile water production of exceptional purity.

Model specification:

Parameter table

Model	Number of Bag	Design pressure	Flow rate (M2/H)	Filter area (M2)	Filtration accuracy (μm)	Inlet and outlet diameter (MM)	Material	Operating temperature (°C)
WY-DSL10-P1-440	1	1.0Mpa	10	0.12	0.5-500	40	PPH	90
WY-DSL20-P1-550	1	1.0Mpa	20	0.25	0.5-500	50	PPH	90
WY-DSL40-P1-265	1	1.0Mpa	40	0.45	0.25-500	65	PPH	90

 

Size	#4 Bag Filter (MM)	#5 Bag Filter (MM)	#2 Bag Filter (MM)
A	610	805	1060
B	445	595	855
C	140	140	152
D	55	55	60
E	124	174	202
F	280	396	510
G	JIS 1.5"	JIS 2"	JIS 2.5"
H	265	324	480
I	164	210	250
J	120	155	186
K	16	18	18

 

 

FAQ
Q: Where is Surplus located?
A: Our office located in HongKong,Dongguan and Shantou City.Our factory located in Shenzhen.
Q: Can I buy direct?
A: Yes,you can buy from Surplus Directly.
Q: Do you manufacture your products in house?
A: Most of our products are manufactured in-house at our factory.Some accessory items are not.
Q: Can I get the riser on my L-shaped aquaculture heater longer/shorter?
A: Yes.There is no price difference for making a heater with a middle riser,but there maybe a cost adder for a longer riser.
Q: What Third Party Approvals do your products carry(CE?)
A: Almost all of our products are CE compliant.

PTFE IMMERSION HEATER	PTC IMMERSION HEATER	QUARTZ IMMERSION HEATER
METAL HEAT EXCHANGERS	(PFA) HEAT EXCHANGERS	ANODE BASKET
PP TANKS	PP BARRELS	PP BAG FILTERS

OUR FACTORY

ENGINEER OFFICE	TOOLING DEPARTMENT	MACHING 1
MACHING 2	MACHING 3	MACHING 4

Company Advantage
For more than ten years, our company has specialized in the research and development and production of PCB and FPC electroplating equipment, electric heaters, cold heat exchangers, and coating on the surface of electroplating equipment. We have collected advanced technologies and processes at home and abroad for many years. With the practice and experience in the PCB industry, the quality, stability and reliability of the products are among the world's leading positions. Our company has passed ISO9001: 2008 quality management system certification and CQC: CE certification, is in line with the world, implements scientific management, and implements international quality standards.