Surplus Industrial Technology Limited |
Verified Suppliers
|
|
Fluoropolymer PTFE Electric Immersion Heater Spiral Shape Immersion
Heater
Options Available
How To Select A Chemical Solution Heater
For corrosive solutions heating, the best of heater will depend on:
Dont hesitate to contact us, we have been helping manufacturers heat dangerous chemicals for almost 50 years. Custom designed L shaped or bottom immersion heaters made of Teflon are also available.
Why am I replacing my immersion heater so often?
We've found that most of the folks we talk to who are replacing
immersion heaters on a regular basis have just used stock immersion
heaters that are readily available from many general industrial
product distributors. Unfortunately, most of those heaters are
designed for heating water or oils. Why is that unfortunate?
Because many people aren't aware that immersion heaters are
specific to the fluid they are intended to heat.
For a long service life from your immersion heater, you’ll need to
make sure that both the heater's sheath material and the power
density of the elements are appropriate for your application. (If
you’re specifying an immersion heater for a new project, these
considerations are equally important. It’s not required to learn
what happens to poorly specified heaters by seeing it firsthand.)
These specifications, of course, are in addition to finding the
right wattage, which is the amount of power your heater needs to do
its job.
To sum up, for the best immersion heater possible, you’ll need to
do three things:
Specify the right sheath material for the fluid being heated,
Specify the right power density (that is, the watts per square inch
or square centimeter), and
Specify a wattage high enough to heat your fluid to the right
temperature.
FAQ
Q: Where is Surplus located?
A: Our office located in HongKong,Dongguan and Shantou City.Our
factory located in Shenzhen.
Q: Can I buy direct?
A: Yes,you can buy from Surplus Directly.
Q: Do you manufacture your products in house?
A: Most of our products are manufactured in-house at our
factory.Some accessory items are not.
Q: Can I get the riser on my L-shaped aquaculture heater
longer/shorter?
A: Yes.There is no price difference for making a heater with a
middle riser,but there maybe a cost adder for a longer riser.
Q: What Third Party Approvals do your products carry(CE?)
A: Almost all of our products are CE compliant.
Q: How late can you ship?
A: Normally 7 days after comfirmed the order.
RELATED SPECIES
METAL IMMERSION HEATER | PTC IMMERSION HEATER | QUARTZ IMMERSION HEATER |
METAL HEAT EXCHANGERS | (PFA) HEAT EXCHANGERS | ANODE BASKET |
PP TANKS | PP BARRELS | PP BAG FILTERS |
OUR FACTORY
ENGINEER OFFICE | TOOLING DEPARTMENT | MACHING 1 |
MACHING 2 | MACHING 3 | MACHING 4 |
Company Advantage
For more than ten years, our company has specialized in the
research and development and production of PCB and FPC
electroplating equipment, electric heaters, cold heat exchangers,
and coating on the surface of electroplating equipment.
We have collected advanced technologies and processes at home
and abroad for many years. With the practice and experience in the
PCB industry, the quality, stability and reliability of the
products are among the world's leading positions. Our company has
passed ISO9001: 2008 quality management system certification and
CQC: CE certification, is in line with the world, implements
scientific management, and implements international quality
standards.