|
[China]
Trade Verify
Address: No. 327, Xingye Road, Industry East Area, Xindu, Chengdu city, sichuan province, China
Contact name:Una Wang
Chengdu Xingtongli Power Supply Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
GENRAL SEPCIFICATION FOR 12V 500A igbt electroplating power supply
| AC Input | voltage | 220v/380v/415v/450v |
| frequency | 50/60hz | |
| phase | 3 phase | |
| output | current | 0~500a optional |
| voltage | 0~12v adjustable | |
| frequency | 40khz | |
| effiencicy | ≥89% | |
| voltage stability | ≤1% | |
| current stability | ≤1% | |
| Stabilization mode | Current stabilization/Voltage stabilization (Switchable easily) | |
| adjustment range | Voltage/Current from 0-100% continuously adjustable within rated range | |
| control part | cooling system | air cooling /water cooling/mixed water & air cooling |
| control method | local panel control/remote control box/ PLC | |
| Display contents | Voltage meter/Current meter/Working/Over temp/Error, etc.. | |
| Protection method | Input over voltage/Under voltage/Over current/Output short/Over heating self protection etc. | |
| use environment | Operating temperature | -20-50℃ |
| Ambient temperature | 30-65℃ | |
| Ambient humidity | ≤90% | |
| Working loading | Full capacity operation, more than 1,000 meters above sea level, reduced load operation |
OPTIONAL FEATURE:12v 500a three phase protable igbt electroplating power supply
| Reduced Ripple | Ripple is the amount of AC that appears as voltage fluctuations on the DC output. Because some metal finishing applications cannot tolerate excessive ripple levels, We offers power supplies with ripple as low as 3% of the operating set point |
| Polarity Reversing | manual reverse or automatic reverse |
| Digital Ampere-Hour / Minute Meter | Totalizing, preset counter and solution metering configurations are available to meet process and EPA requirements. |
| Computer Interface | allow isolated connections of a rectifier to a computer or PLC. The computer or PLC can send voltage and/or current control signals to the rectifier, and in return receive signals from the rectifier proportional to the output voltage and/or current. Available in Analog, Modbus, Profibus, ethernet and DeviceNet. |
| Variable Timer | Timers are available to turn the rectifier off, sound an alarm, illuminate a light (or any combination) at the end of a process cycle |
Complete pre & after service for this 125V 150A DC anodizing PLC control air cooling igbt rectifier
Pre-Sales Service * Inquiry and consulting support within 12 hours. * Sample testing support. * View our Factory. | After-Sales Service * Training how to instal the machine, training how to use the Eelectroplating machine. * Engineers available to service machinery overseas. |
Installation
| 1,Placing 15v 2000a high frequency switch model DC Industrial electrolytic rectifier and keep the body stability; ensure good ventilation. |
| 2,Checking electrolysis rectifier out cover if loosing. |
| 3,Connecting shell to ground to prevent static electricity. |
| 4,Conecting the AC input wire |
| 5,Connecting the DC output copper bars |
| 6,Connecting the remote control box,if local control ,skip this step |
| 7,Turn on air switch, then the fan starts to rotate and the power indicator light. |
| 8,Clockwise rotation adjustment button, voltmeter degree increases, working indicate light lighting. |
| 9,Adjust knob to maximum, then the voltmeter should indicate the rated voltage, current meter indicates the load volume accordingly. |
| 10,Disconnect the air switch, turn off the power |
