Chengdu Honpho Technology Co., Ltd. |
Verified Suppliers
|
|
1920x1080 3 Axis Ethernet Interface Electro Optical System Tri-sensors
TS01CT-N is three- axis gyro stabilized network version EO IR electro optic system, 360° continuous rotation servo motor, Built-in 30X zoom module and uncooled longwave infrared module (LWIR), the total weight about 970g.TS01CT-N airborne electro optical pod with light weight, mature and high stabilization accuracy pan tile servo system technology, and can be assembled on UAV,ships and vehicles to meet the needs of sea and air.
Functions
1. Provide the IR image for detection area
2. High precision visual axis stabilization function
3. With the capability of detection and recognition for ground target
4. Support search, tracking, lock, guiding, etc working ways
5. With character overlay, custom and display functions;
6. With self - check and fault diagnosis function
7. support target postion
Specifications
EO sensor | Wavelength | 0.4μm~0.9μm | |||
Resolution | 1920x1080 | ||||
Focal length | 4.3mm~129mm(30X) | ||||
FOV | 63.7°~2.3° | ||||
Video output | HD-SDI(1080P 30Hz) | ||||
Distance | PEOPLE:Detection 6km;Recognition 2km VEHICLE:Detection 15km;Recognition 8km |
IR sensor | Wavelength | 8μm~14μm | |||
Resolution | 640x512 | ||||
Focal length | 25mm/F1.0 | ||||
FOV | 17.4°~14° | ||||
Video output | HD-SDI(1080P 30Hz) | ||||
Distance | PEOPLE:Detection 0.7km;Recognition 0.2km VEHICLE:Detection 4.2km;Recognition 1km |
Servo System | Rotating limits | 360º continuous Pan, Pitch: -110° ~+10 º | ||||
Angular accuracy: | ≤2mrad | |||||
Stablization accuracy | ≤100μrad(1σ)(2°/Hz,1°/Hz Swing) | |||||
Max.angular speed | ≥50°/s | |||||
Max. angular acceleration: | ≥90°/S |
Tracking Functions | Motion speed: | 30pixel/frame | ||||
Target imaging contrast: | 8% | |||||
Target imaging pixel(Mini) | 4x3 pixels | |||||
Support | Anti -occlusion without loss of function |
Interface | Communication interface | RS422 x1(TTL optional) | |||
Video output | Ethernet |
Mechanical Drawing
Unpacking of the product
The payload is fixed in the packaging box to prevent mechanical damage during transport. After received product, the user should first check whether the packaging box is in good condition. In case of damage to the box, the cargo carrier and the after-sales service department shall be notified in time. Open the packaging box and check the product packing list one by one
Mechanical Drawing
Certificate of HONPHO