Active Member
|
[China]
Address: Room 209, No.6 Weihua West Road,Shizhong District,Jinan,250000,Shandong,China
Contact name:sales
Jinan Wang Te Bei Equipment Co., Ltd. |
|
|
1. introduction
This compression testing machine is suitable for compression strength test of cement, concrete, brick, etc. And if equipped with suitable test fixtures, it can make test of splitting tensile test, flexural and bending test, static elastic modulus test etc.
2.Specification
| o. | Product name | Computer control concrete compression testing machine | |
| 1 | Model | YAW-2000 | YAW-3000 |
| 2 | Max. capacity | 2000KN | 3000KN |
| 3 | Force measuring range | 2%-100%FS | |
| 4 | Relative error of test force | ≤±1% | |
| 5 | Ball screw adjusting mode | Electrical | |
| 6 | Size of upper and lower compression plate | 370x370mm | 400x500mm |
| 7 | Max. distance between upper and lower compression plate | 330mm | 500mm |
| 8 | Max. stroke of piston | 100mm | 150mm |
| 9 | Piston diameter | 310mm | 400mm |
| 10 | Rated pressure of oil pump | 40Mpa | |
| 11 | Power | 3 phase 1.1kW | |
| 12 | Dimension | 700x700x1600mm | 800x800x1800mm |
| 13 | Weight | 1600kg | 2300kg |
Frame
· Four column high stiffness welded frame tested for stability.
· Heavy duty spherical seat in lubricating oil bath, allowing initial free alignment at the initial contact with the specimen and automatic jamming up to the end of test.
Safety features
· Max. pressure valve to avoid machine overloading
· Piston travel limit switch (Extra cost)
· Emergency stop button
