MMS ISO 9150 Protective Clothing Molten Metal Splashes Impact Tester

MMS ISO 9150 Protective Clothing Molten Metal Splashes Impact Tester

Introduction:

It is suitable to measure the resistance of protective materials to liquid metal splash.During test,certain molten metal splashes on sample which is installed at specified angel.Put a PVC film on the sample's back to contact it.

Record the change of PVC film after splashing to evaluate the damage situation. According to test result,using bigger or smaller metal to repeat the test until the damage of PVC film is least.

Parameters:

Features:

• Melt the metal with furnace having induction coils and high frequency generator.
• Far IR temperature measuring device is used to control temperature and measure splashing temperature.
• Temperature is set at 700°C~1800° by temperature controller.
• Step motor controls inclination speed and angel.
• Drop guide to collect the drops and to guide them towards the vertically oriented test specimen.
• Senor for measuring the temperature linked to a recording device.
• Holding frame and counterweights for the test specimen.
• Motor speed can be adjust so that the steel rod is fed at the rate of (10 f 1) g/mm.
• Needle valves adjust the O2 and acetylene flow rate.
• LCD Screen display and control the motor speed.

MMS ISO9150 Molten Metal Splashes Impact Tester Real Picture: