Active Member
|
[China]
Address: 601， Block A, Changzheng Business Center, No.75, Changzheng Street, Shijiazhuang City, Hebei, China
Contact name:
Shijiazhuang Aier Machinery Co.,Ltd |
|
|
Gravel suction Pump Wear Resistant Spare Parts with Rubber Liners or high chrome alloy liner
More than 10 years slurry pump and parts manufacture experience
WN large capacity Gravel suction pump for building materials
Product Description
Introduction:
WN dredging pump is a new type of sludge pump, aiming at rivers and seas out of repair. WN dredging pump is a single-stage single suction cantilever horizontal centrifugal pump.
Specification:
| Item | Dredging pump |
| Dredging pump | factory price WN series sand suction dredging pump for sale |
| Model | WN |
| Material | Alloy cast iron, alloy steel and customized |
| Color | White and adjustable |
| Mode | Horizontal |
| Impeller | Closed impeller |
| Drive | Belt or coupling |
| Seal | Soft packing seal or mechanical seal |
| Speed | 120 r/min ~~~1400 r/min |
| Theory | Centrifugal pump |
| Structure | Single stage pump |
| Usage | Mud, sludge, slurry, sand gravel |
| Power | Electric |
| Standard or Nonstandard | Standard |
| Application | dredging, digging mud and filling harbor in river , sea and harbors |
| Outlet diameter | 100 - 1200 mm |
| Capacity | 180 - 22000 m³/h |
| Head | 20 - 90m |
| Certificate | ISO9001 |
Feature:
The structure of 200WN-500WN type dredging pump is single-casing, single-stage, single-suction, cantilever and horizontal. According to the connection with the gear box, two structures can be offered: self-carrying bracket and pump-box assembly. The lubrication for the bracket is grease or thin oil.
The structure of 600WN-1000WN type dredging pump is double-casing, single-stage, single suction, cantilever and horizontal. It has self-carrying bracket. Lubrication is forced thin oil lubricating. The double-casing design can ensure the liner can work till it is worn out, and if the liner crack, water can not enter into the pump.
Application:
The dredging pump is widely used in dredging, digging mud and filling harbor in rive and sea all over the country such as the Yangtze Rive Basin, the Yellow Rive Basin, the Pearl River Delta, the Huai River Basin, Liaohe River Basin, harbors and wharfs.
pump parts
Completely interchangeable with slurry pumps and gravel pumps
For unlisted slurry pump parts, OEM service offered---Drawings needed.
- Impeller
- Metal Liner
- Rubber Liner
- Bearing Assembly
- Base
- Pump Volute;
- Cover Plate & Frame Plate
- Others
Slurry Pump Part Material
| Part Name | Material | Specification | HRC | Application | OEM Code |
| Liners & Impeller | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| AB15: 14%-18% chrome white iron | ≥59 | Used for higher wear condition | A07 | ||
| AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 | ||
| AB33: 33%-37% chrome white iron | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 | |||
| Rubber | R08 | ||||
| R26 | |||||
| R33 | |||||
| Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| Grey iron | G01 | ||||
| Stuffing Box | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
| Grey iron | G01 | ||||
| Frame/Cover plate, bearing house & base | Metal | Grey iron | G01 | ||
| Ductile iron | D21 | ||||
| Joint rings & seals | Rubber | Butyl | S21 | ||
| EPDM rubber | S01 | ||||
| Nitrile | S10 | ||||
| Hypalon | S31 | ||||
| Neoprene | S44/S42 | ||||
| Viton | S50 |
