Home Companies Fuan Zhongzhi Pump Co., Ltd.

Graphite Unbalanced Burgmann MG1 Single Face Rubber Spring

Fuan Zhongzhi Pump Co., Ltd.

Contact Us

Trade Verify

Address: No.155 Shangcun Qingxiyang Industry Zone,Fuan city,Fujian,China

Contact name:Semmy Wu

Inquir Now

Fuan Zhongzhi Pump Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Graphite Unbalanced Burgmann MG1 Single Face Rubber Spring

City & Province fujian
Categories Springs
InquireNow

Product Details

Burgmann MG1 Mechanical Seal Unbalance Single Face Single Spring Rubber For Water Pumps 

 

Mechanical Seal MG1 Design Features

- Single face, single spring, unbalanced, rubber bellows structure.
- The seal face is driven through the spring, and spring seat, good floating.

- Suitable for many specifications and designs which conform to ISO3069, DI24960, AND GB6556.

Mechanical Seal MG1 Materials(to DIN24960)

- Rotary Ring: B, Q2, U1, U2
- Stationary Ring: Q2, U1, U2, V1
- Spring and Other Parts: F, G

 

Mechanical Seal MG1Operating limits

- Pressure: ≤ 1.6MPa
- Temperature: -20~140℃
- Speeds: ≤10m/sec
- Viscosity: ≤ 1.0Pa.s(1000cp)(Soft VS Hard); ≤ 3.5Pa.s(3500cp)(Hard VS Hard)

 

Mechanical Seal MG1 Applications

Used in centrifugal pumps, mixers, and other rotating equipment.

 

Mechanical Seal MG1 Medium

Liquid waste of grains, sewage water, oil, etc.

 

Mechanical Seal MG1 Advantage

1. Fine workmanship
The product is exquisitely manufactured, and production is strictly in accordance with international standards. Any non-conforming product is prohibited from leaving the factory.


2.Energy-saving and environmental protection


When the double-end mechanical seal is running, the sealing cooling water is recovered and reused through the water inlet and outlet holes. When the seal is a single end face, the set can be used as a water-free seal, thereby fully achieving the effect of energy-saving and environmental protection.


3.No leakage
There will be no start-up leakage during use, and the seals are tested before going out of the factory.


4. Structural characteristics
Easy to install, no need to measure the working length of the seal during installation; easy to remove, take out seals for cleaning and inspection without disassembling the pump equipment


Mechanical Seal MG1 Size Information

mechanical seal MG1
ModelShaftd1d3D4dbL
MG1-20202037383321.5
MG1-22222237383321.5
MG1-24242442.5443822.5
MG1-25252542.5443823
MG1-28282849504426.5
MG1-30303049504426.5
MG1-32323253.5554627.5
MG1-35353557595028.5
MG1-38383859615330
MG1-40404062645530
MG1-45454568706030
MG1-48484870.5746330.5
MG1-50505074776530.5
MG1-55555581837235
MG1-60606088.5917938

 

centrifugal water pump vortex water pump

centrifugal electric water pump

Hot Products

DB 2850 RPM 0.37kw 0.55hp Self Priming Peripheral Pump Peripheral Water Pump TECHNICAL DATA(220-240V...
Die-Cast Aluminium 5.5kw 7.5hp 1450rpm Hollow Shaft Motor Hollow Shaft Motor Mode: 112M2-4 ...
24mm Inner Three Phase 5.5kw 1400rpm Hollow Shaft Motor Hollow Shaft Motor Mode: 112M2-4 Horsepower: ...
Female Shaft 5.5kw 7.5Hp Asynchronous A.C. Motor 112M2-4 Hollow Shaft Motor Mode: 112M2-4 Horsepower...
100% Copper Wire Class F IE1 IP55 1400RPM Hollow Shaft Pump Motor Hollow Shaft Motor Hollow Shaft ...
Clockwise Rotation 24mm 220-380V IE2 Hollow Shaft Motor Hollow Shaft Motor Hollow Shaft Electric ...