1400rpm Hollow Shaft Motor Hydraulic Electric Motor For Oil Pump

Hollow Shaft Motor

Site conditions:  Motors are suitable for most working environments at a temperature from -15°C t0 +40°C and altitudes below 1000 meters

Insulation:  The motors' insulation system is set to Class F(105K), examined by Class B(80K), which ensures the life span and reliability of the motors.

Motor protection:  Motors can be installed with PTC, PT100 used as winding and bearing temperature measurement on request.

Voltage and frequency: Standard voltage and frequency is 380V 50HZ and can be set to any single voltage in the range of 200-660V at a frequency of 50 or 60HZ. The motors work well within variations of ±5% from the rated voltage.

Vibration:  Motors are designed for vibration class A; vibration class B is available on request.

Duty:  Continuous(S1)

Cooling and ventilation:  The standard cooling method is enclosed fan cooled(TEFC) following IC411 of IEC60034-6. Standard motors are equipped with auxiliary plastic fans.

Winding:  100% copper wire

Protection class:  The standard protection class is IP54/IP55, which can be used in a humid and dusty environment. Higher degrees of protection are available.

Application

Direct-connected with vane pump for plastic machinery

Note

1. Be sure to correct concentricity during installation, allow 0.1mm deviation

2. Be sure to confirm the matching size of the oil pump and motor before purchasing. Please consult for more details

3. If you don't know what oil pump to match, please measure the "shaft size", "flange inner diameter" and "hole distance" of your motor? We will find the suitable motor for you based on the size

Data