Home Companies Fuan Zhongzhi Pump Co., Ltd.

Aluminum Housing Hollow Shaft Electric Motor 0.25-22kw For High Pressure Pump

Contact Us

Trade Verify

Address: No.155 Shangcun Qingxiyang Industry Zone,Fuan city,Fujian,China

Contact name:Semmy Wu

Fuan Zhongzhi Pump Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Aluminum Housing Hollow Shaft Electric Motor 0.25-22kw For High Pressure Pump

City & Province	fujian
Categories	Pumps

Product Details

High-Efficiency Aluminum Housing Hollow Shaft Electric Motor For High-Pressure Pump

Hollow Shaft Motor

High-efficiency aluminum housing hollow shaft electric motor. The direct coupling between motor and high-pressure pump, ideal for pressure cleaners and washing plants, significantly reduces the overall size of the machine and, at the same time, provides a reliable and cost-efficient solution.

Operating conditions:

Output	0.25-22kw	Frame size	71-160
Duty	S1	Speed	1000/1500/3000 rpm
Ambient temperature	-15℃≤θ≤60℃	Rated voltage	220V, other voltage on request
Frequency	60HZ	Protection class	IP55/54
Phase	3	Pole	2,4,6
Insulation Class	B, F	Efficiency	IE3/IE2

Option feature:

1. small volume
2. More transmission torque
3. Higher transmission efficiency
4. Lower noise
5. More convenient to install
6. Simple maintenance
7. durable
8. Longer service life

Sizing table:

THREE-PHASE 2 POLES 3000RPm 50Hz
FRAME	POWER		RPM	COSφ	EFF.%	VOLT	AMPERE
FRAME	KW	H.P.	RPM	P.F.		V	A
711-2	0.37	0.5	2780	0.82	82	400	0.8
712-2	0.55	0.75	2790	0.83	81	400	1.2
90L1-2	2.2	3	2820	0.86	78	400	4.9
90L2-2	3	4	2820	0.86	78	400	6.6
90L3-2	3.7	5	2820	0.80	83	400	8.6
100L1-2	3	4	2840	0.83	81	400	7
100L2-2	4	5.5	2850	0.86	82	400	8.5
100M1-2	4	5.5	2830	0.84	82	400	9.4
112M2-2	5.5	7.5	2840	0.85	83	400	11.7
132S1-2	5.5	7.5	2890	0.86	84	400	11.6
132S2-2	7.5	10	2900	0.86	84	400	15.4
132M1-2	11	15	2920	0.88	86	400	21.8
132M2-2	15	20	2920	0.88	86	400	29.3
160M1-2	15	20	2920	0.87	88	400	28
160M2-2	18.5	25	2920	0.87	89	400	34
160M3-2	22	30	2920	0.87	89.2	400	41

THREE-PHASE 4 POLES 1500RPm 50Hz
FRAME	POWER		RPM	COSφ	EFF.%	VOLT	AMPERE
FRAME	KW	H.P.	RPM	P.F.		V	A
711-4	0.25	0.35	1370	0.73	64	400	0.8
712-4	0.37	0.5	1350	0.74	68	400	1.1
713-4	0.55	0.75	1350	0.75	66	400	1.6
90L1-4	1.5	2	1400	0.82	78	400	3.4
90L2-4	2.2	3	1400	0.79	77	400	5.4
90L3-4	2.6	3.5	1400	0.80	78	400	7.4
100L1-4	2.2	3	1400	0.80	81	400	5.1
100L2-4	3	4	1410	0.80	81	400	6.9
100L3-4	4	5.5	1420	0.80	82	400	9.4
100M1-4	4.4	6	1420	0.82	83	400	10
112M1-4	4	5.5	1420	0.80	83	400	9
112M2-4	5.5	7.5	1430	0.82	84	400	12.1
112M3-4	6.2	8.5	1425	0.82	84	400	13.5
112L-4	7	9.5	1430	0.80	85	400	13.8
132S1-4	5.5	7.5	1430	0.82	84	400	11.7
132S2-4	7.5	10	1430	0.84	84	400	15.4
132M1-4	9.2	12.5	1430	0.90	85	400	17.8
132M2-4	11	15	1430	0.90	87	400	21.3
132M3-4	12.5	17	1430	0.88	84	400	26
160M1-4	15	20	1450	0.86	89	400	29
160M2-4	18.5	25	1450	0.86	90	400	34

THREE-PHASE 6 POLES 1000RPm 50Hz
FRAME	POWER		RPM	COSφ	EFF.%	VOLT	AMPERE
FRAME	KW	H.P.	RPM	P.F.		V	A
71-6	0.25	0.35	880	0.73	45	400	1.1
90L-6	1.1	1.5	910	0.72	72	400	3.2
100L-6	1.5	2	910	0.80	74	400	3.9
112M1-6	2.2	3	940	0.80	80	400	5
112M2-6	3	4	940	8	79	400	6.9
132S1-6	3	4	940	0.78	80	400	6.9
132S2-6	4	5.5	950	0.79	82	400	9
132M1-6	5.5	7.5	950	0.79	83	400	12.4
132M2-6	7.5	10	950	0.79	83	400	16.5
160M1-6	7.5	10	960	0.77	87	400	16.5
160M2-6	11	15	960	0.79	88	400	23

High-quality Capacitor

Adopt suitable capacitor made by advanced production line, heat resistant to 85℃; the working lift is motor than 10000 hours.

Cold-rolled Stator

Good quality cold-rolled silicon from wu gang brand made by high-speed punching machine, less burr, high concentricity, and stability.

Coil with 100% Copper wire

100% copper wire, with thermal protector, make the pump stop working automatically at the condition of jam or overload, etc.

No leakage Of winding

100% coil testing to make sure each coil is energized, and no leakage at high voltage condition

Hollow Shaft Motor GUARANTEE:

Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.

OUR SERVICE:

1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods produced by ourselves, we provide one-stop services from designing, printing to processing. Customers can provide the design according to your request and sample making. Also, we can advise how to make the products according to customers' target prices.

FAQ:

1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the B.L. copy or 100% L.C. at sight.