|
Trade Verify
Address: No.155 Shangcun Qingxiyang Industry Zone,Fuan city,Fujian,China
Contact name:Semmy Wu
Fuan Zhongzhi Pump Co., Ltd. |
|
Verified Suppliers
|
|
|
MS100L1-4 3 Phase Induction Motor Squirrel Cage 3HP 2.2KW 400V 60HZ
3 Phase Induction Motor APPLICATIONS:
MS100L1-4 3 phase induction motor derives its name from the magnetic field induced by the rotor current instead of electrical connections. It chooses the squirrel cage rotor type because the advantage of this motor is that the structure is simple, there is no winding on the rotor, the maintenance cost is low, and the service life is long.
Technical Data:
| Model | Power | Voltage(V) | Frequency (Hz) | Current (A) | Power Factor | Eff(%) | Speed (r/min) | T start/Tn | Tmax/Tn | Ist/In | |
| HP | KW | ||||||||||
| MS100L1-4 | 3 | 2.2 | 400 | 60 | 4.8 | 0.8 | 83 | 1400 | 2.2 | 2.4 | 5 |
3 Phase Induction Motor Application:
Advantage:
The rotating speed of the three-phase induction motor rotor is less than the speed of the rotating magnetic field. Therefore, relative motion exists between the magnetic field and the rotor windings, generating induced electromotive force and current and interacting with the magnetic field generating electromagnetic torque, thus achieving energy conversion. Compared with single-phase induction motors, three-phase induction motor operating performance is good and saves various materials. By different rotor structures, three-phase induction motors can be divided into cage type and winding type.
Test Report:
| Test No: | ZZ18372 | |||||||||
| Model | MS100L1-4 | Motor No. | ||||||||
| Rate Power | 2.2kW | Rated Voltage | 400V | Rate Current | 4.8A | |||||
| Rate Speed | 1630r/min | Rate Frequency | 60Hz | Insulation | F | |||||
| Duty | S1 | Protection | IP55 | Connection | Ｙ | |||||
| Standard | Test standard | GB1032-2012 | B | Produce Date | 2018-12-14 | |||||
| Test Items | Standard | Test Resort | ||||||||
| assured value | Tolerance | |||||||||
| 1. 25℃ Average End Resistance | Ω | 4.3714 | ||||||||
| 2. Unload Current | A | 2.61 | ||||||||
| 3. Unload Current Deviation | % | 1.1 | ||||||||
| 4. Unload Input Power | W | 203.9 | ||||||||
| 5. Locked Rotor Current | A | 32.66 | ||||||||
| 6. Locked Rotor Current/Rate Current | Times | 6.84 | ||||||||
| 7. Locked Rotor Torque | N.m | 30.18 | ||||||||
| 8. Locked Rotor Torque/Rate Torque | Times | 2.48 | ||||||||
| 9. Load Current | A | 4.774 | ||||||||
| 10. Rate Torque | N.m | 12.17 | ||||||||
| 11. Max.Torque | N.m | 36.55 | ||||||||
| 12. Max. Torque/ Rate Torque | Times | 3.00 | ||||||||
| 13. Min. Torque | N.m | 26.51 | ||||||||
| 14. Min. Torque/Rate Torque | Times | 2.18 | ||||||||
| 15. Rate Speed | r/min | 1726.8 | ||||||||
| 16. Iron Loss(When Rate Voltage) | W | 91.5 | ||||||||
| 17. Mechanical Loss(When Rate Speed) | W | 57.4 | ||||||||
| 18. Stator Winding Loss | W | 178.7 | ||||||||
| 19. Rotor Winding Loss | W | 96.4 | ||||||||
| 20. Stray Loss | W | 25.5 | ||||||||
| 21. Total Loss | W | 449.5 | ||||||||
| 22. Rated Output Power | W | 2200 | ||||||||
| 23. Input Power | W | 2649.8 | ||||||||
| 24. Full Load Power | % | 82.89 | ||||||||
| 25. Full Load Power Factor | 0.8 | |||||||||
| 26. Stator Winding Temperature Rising | K | 51.7 | ||||||||
| 27. Stator Temperature | ℃ | |||||||||
| 28. Bearing Temperature | ℃ | |||||||||
| 29. Cooling Medium Temperature | ℃ | 17.4 | ||||||||
| 30. Hot Insulation Resistance | MΩ | |||||||||
| 31. voltage withstanding test | V/min | |||||||||
| 32. Vibration | mm/s | 1.4 | ||||||||
| 33. Noise | dB(A) | 66 | ||||||||
| 34. Turn Check(Face to shaft side) | Clockwise | |||||||||
| 35. Interturn Impact Voltage Test | V | 2500 | ||||||||
| 36. Over Speed Test Time 2min 1.2n | OK | OK | ||||||||
| 37. Short-Term Over-Torque Test 15s 1.6Tn | OK | OK | ||||||||
| 38. Accidental Overcurrent Test 2min 1.5In | OK | OK | ||||||||
| 39. r | 0.9991 | |||||||||
| 40. A | 0.1711 | |||||||||
| 41. B | -6.0764 | |||||||||
Load Test Report:
| Test No.: | ZZ18372 | |||||||||
| Test Items | 150% Load | 125% Load | 100% Load | 75% Load | 50% Load | 25% Load | ||||
| 1. Load Current | A | 7.01 | 5.81 | 4.77 | 3.91 | 3.23 | 2.76 | |||
| 2. Input Power | W | 4146.05 | 3365.6 | 2649.75 | 1986.79 | 1365 | 772.66 | |||
| 3. Slip Ratio | % | 6.9 | 5.4 | 4.1 | 2.9 | 1.9 | 1 | |||
| 4. Bross Loss | W | 385.54 | 265.23 | 178.71 | 119.75 | 82.08 | 59.46 | |||
| 5. Aluminum Loss | W | 254.73 | 162.4 | 96.45 | 51.77 | 23.29 | 5.91 | |||
| 6. Miscellaneous Loss | W | 61.26 | 41.14 | 25.55 | 14.04 | 6.18 | 1.52 | |||
| 7. Efficiency | % | 79.51 | 81.81 | 82.89 | 83.12 | 80.6 | 71.13 | |||
| 8. Power Factor | 0.853 | 0.835 | 0.8 | 0.733 | 0.61 | 0.404 | ||||
| 9. Output Power | W | 3300 | 2750 | 2200 | 1650 | 1100 | 550 | |||
| 10. Mechanical Loss | W | 57.4 | 57.4 | 57.4 | 57.4 | 57.4 | 57.4 | |||
| 11. Iron Loss | W | 86.88 | 89.22 | 91.47 | 93.65 | 95.76 | 97.82 | |||
MS Installation Dimensions:
Pictures:
3 Phase Induction Motor GUARANTEE:
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
FAQ:
1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you A factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the BL copy or 100% LC at sight.
