Active Member
|
[China]
Address: 12-3, No.6, Keyuan 1st Road, Jiulongpo District, Chongqing, China
Contact name:Sen
Chongqing Shanyan Crane Machinery Co., Ltd. |
|
|
European Style Single Girder Top Running End Carriage Of Crane
Product Description:
European style single girder top running end carriage of crane is a
popular and cost-effective lifting equipment used in a variety of
fields and sectors, such as manufacturing, minning, chemical
industry and steel mills. The overhead crane comes in four main
configurations, including single/double girder, end carriage, top
running and underhung system. Our overhead cranes can also be
customized designed and constructed to suit your special lifting
equipments.
Product Technical Parameters:
| Model | Crane | Rectangular Steel tube | Wheel size | Motor power (20m/min) | Motor power (30m/min) | S1 (mm) | S2 (mm) | W1 (mm) | W2 (mm) |
| EUS90-15 | 1.6t-7.5m | 150*150*6 | U90*60 | FA27-0.25KW | FA27-0.37KW | 1500 | 1300 | 400 | 550 |
| EUS90-20 | 1.6t-11.5m | 2000 | 1800 | 400 | 550 | ||||
| EUS90-25 | 1.6t-16.5m | 2500 | 2300 | 400 | 550 | ||||
| EUS90-30 | 1.6t-22.5m | 3000 | 2800 | 400 | 550 | ||||
| EUS125-15 | 3.2t-7.5m | 150*200*8 | U125*60 | FA27-0.37KW | FA27-0.55KW | 1500 | 1300 | 400 | 550 |
| EUS125-20 | 3.2t-11.5m | 2000 | 1800 | 400 | 550 | ||||
| EUS125-25 | 3.2t-16.5m | 2500 | 2300 | 400 | 550 | ||||
| EUS125-30 | 3.2t-22.5m | 3000 | 2800 | 500 | 650 | ||||
| EUS125-35 | 3.2t-28.5m | 3500 | 3300 | 600 | 750 | ||||
| EUS160-15 | 6.3t-7.5m | 150*250*8 | U160*70 | FA37-0.55KW | FA37-0.75KW | 1500 | 1200 | 400 | 550 |
| EUS160-20 | 6.3t-11.5m | 2000 | 1700 | 400 | 550 | ||||
| EUS160-25 | 6.3t-16.5m | 2500 | 2200 | 400 | 550 | ||||
| EUS160-30 | 6.3t-22.5m | 3000 | 2700 | 500 | 650 | ||||
| EUS160-35 | 6.3t-28.5m | 3500 | 3200 | 600 | 750 | ||||
| EUS200-20 | 12.5t-11.5m | 200*250*8 | U200*70 | FA47-0.75KW | FA47-1.1KW | 2000 | 1700 | 500 | 650 |
| EUS200-25 | 12.5t-16.5m | 2500 | 2200 | 500 | 650 | ||||
| EUS200-30 | 12.5t-22.5m | FA47-1.1KW | 3000 | 2700 | 600 | 750 | |||
| EUS200-35 | 12.5t-28.5m | 3500 | 3200 | 700 | 850 | ||||
| EUS250-20 | 16t/20t-11.5m | 200*300*8 | U250*80 | FA57-1.1KW | FA57-1.5KW | 2000 | 1600 | 500 | 650 |
| EUS250-25 | 16t/20t-16.5m | 2500 | 2100 | 600 | 750 | ||||
| EUS250-30 | 16t/20t-22.5m | FA57-1.5KW | 3000 | 2600 | 700 | 850 | |||
| EUS250-35 | 16t/20t-28.5m | 3500 | 3100 | 700 | 850 |
Product Installation:
Put the connection plate on the top of end carriage, Align the
Positioning Pin Hole and put the flexible positioning pins of onto
the holeφ10x30 into the hole to fix the connection plate.Connect
the connection plate and end carriage with bolt M16x70.
Press the two bearings into the two sides of wheels and then
put it into the end carriage; Fix the wheels with shaft and shaft sleeve.
Fix the shaft with the shaft platen; Fix the shaft platen with Bolts.
Install the Rubber buffer onto seal plate and then fixed the seal plate onto the two ends of the end carriage with bolts.
This mounting plate is used for Current Collector Bracket installation at site.Remove the mounting plate when install the Current Collector Bracket, Welding the bracket onto the mounting plate and then fix the mounting plate onto the End carriage with Bolts.
