Full Function Rotor Testing Machine / Conducting Bar And End Ring
Test
1. Introduction
- Test object: motor rotor
- Test: the quality of the conducting bar and end ring
2. Technical specification
Test object | The conducting bar and end ring |
Display mode | 19” LCD |
Parameter save | Software save |
Test mode | Continuous mode / single mode |
Dimension range | Outer diameter: 20-100mm Inner diameter: 4-29mm Lamination thickness:100mm(max) |
Judgement parameter | The quantity of conducting bar, minimum amplitude, maximum
amplitude, comprehensive value |
Control mode | Auto/manual |
Working ambient | Temperature 0~40℃,humility≤90%RH |
3. Feature
- The machine can be applied to both laboratory and production line
to test conducting bar and end ring.
- Rotor testing machine tests the conducting bar and ending ring
separately with two special sensors.
- Put the rotor on the station and conduct the test automatically.
Three rotor size parameters can be input in the setting interface,
and two sensors can reach the set position automatically. The
machine eliminates the error of manual adjustment for the sensor
height, distance and angle, and the test repeatability and
stability will be highly improved.
- Output the test result, record the data, and display the quantity
of conducting bar, broken bar and thin bar automatically.
- The machine, developed as to user habit and focus is more humanized
and easier to be operated.
- Full function: test the broken bar, thin bar, porosity, sand hole
and residue caused by manufacturing process or bad material.
4. Reference pictures