Active Member
|
[China]
Address: Qiutou Village, Houkou Township, Ningjin County, Xingtai City, Hebei Province
Contact name:Tina
Nuoxing Cable Co., Ltd |
|
|
Stranded Aluminum Wire AAC Bare Overhead Conductor Power Cable DIN 48201
Application:
AAC bare aluminum conductor is also called aluminum stranded wire.
It is made of electrolytic refined aluminum with a minimum purity
of 99.7%.
Standard:
BS 215-1 / BS EN 50182 / IEC 61089 / ASTM B 231/B 231M / DIN 48201-5.
Structure:
Concentric stranded aluminum conductor (AAC) is made of one or more
hard-drawn 1350 aluminum alloy strands. These conductors are used
for low, medium and high voltage overhead lines.
AAC has been widely used in urban areas. The span of these areas is
usually short, but the electrical conductivity requirements are
higher. The excellent corrosion resistance of aluminum makes AAC
the conductor of choice in coastal areas.
Due to its relatively poor strength-to-weight ratio, AAC has
limited use in transmission lines and rural power distribution
because of the large span of use.
All aluminum conductors are composed of one or more strands of
aluminum wire.
Specificaiton:
| Product name | Bare Aluminium Conductor |
| Certifications | CE/CCC/ISO |
| Standard | ASTM,IEC, DIN,BS |
| Conductor material | Stranded Aluminum |
| Insulation Material | None |
| Section Area | 10-1000 sqmm |
| Packing | wooden drum |
| Warranty | one year |
Operating conditions:
Ambient temperature | -5°C - 50°C |
Wind pressure | 80 – 130kg/m2 |
Seismic Acceleration | 0.12 - 0.05g |
Isokeraunic Level | 10 – 18 |
Relative humidity | 5 – 100% |
Precautions for storage:
(1) Bare wires are afraid of damp and chemical corrosion. They
should be stored in a dry and ventilated warehouse. It is strictly
forbidden to store them together with acid-base substances,
corrosive solids and gases. The relative humidity in the warehouse
shall not be greater than 70%.
(2) Do not overlap unpackaged copper wires and aluminum wires to
avoid electrochemical effects and corrosion of aluminum wires.
(3) Bare wires should be protected from mechanical damage during
storage and transportation, and various molded wires should be
avoided from twisting and folding.
(4) Bare wires packed in coils should be placed upright. When coils
of bare wires are stacked, they should be stacked with stows. The
height of the stack should be 1.5-2m. The shape of the stack must
be neat to avoid collapse. The width is preferably 2 rolls for easy
inspection.
(5) Bare wires must be inspected regularly to prevent corrosion and
deterioration during storage.
Bare Aluminium Conductor
