|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
IEC60065 and UL1310 Dielectric Strength Tester for Testing Insulating Material with Brass Electrodes or Stainless Steel Electrodes
1. Application:
For testing insulating material
2. Standards compliant
IEC60065, UL1310
3. Introduction
The equipment is designed according to IEC60065 and UL1310, It’s mainly used for testing thin-layer insulation material electric strength. Stand part of the test device using the whole structure, made of 304 plate material processing. To improve the insulation board and creepage dielectric properties, surface brushed polished, bottom bracket the minimum distance from the edge of >35mm, the altitude of 2000 meters designed to meet the strength test requirements of 12KV.
4. Technical Parameter:
| Standards | IEC60065 | UL1310 |
| Mass of the moveable electrode | 100g±1g | 50g±1g |
| Diameter of metal pin | Φ5mm±0.1mm | Φ6.4mm±0.1mm |
| Diameter of support pin | Φ5mm±0.1mm | Φ6.4mm±0.1mm |
| edges rounded radius | 0.5mm | 0.8mm |
| Material of metal pin and support pin | Stainless steel or brass | |
5. Picture:
