|
[China]
Trade Verify
Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
Contact name:Penny Peng
Pego Electronics (Yi Chun) Company Limited |
|
Verified Suppliers
|
|
|
IEC60061-3 Lamp Cap Gauge E27 Protection Gauges Contact Gauge 7006-50 7006-51A
Gauge for Finished Lamp fitted with E27 Caps for Testing Contact Making (7006-50-1)
Purpose: to check lamp dimensions for contact making in IEC holders.
Testing: the shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge till plane W reaches plane V or projects beyond it.
Gauge for E27 Caps on Finished Lamps for Testing Protection Against Accidental Contact During Insertion (7006-51A-2)
Purpose: to check protection against accidental contact during insertion of caps E27 on finished lamps.
Testing: the shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
Gauge for E27 Caps(51*39) on Finished Lamps (7006-51-2)
Purpose: to check protection against accidental contact of cap E27/51*39 on finished lamp.
Testing: the shape of the cap with regard to protection against accidental contact is assumed to be correct if, when the cap is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
| Figure Number | Description |
| E27 Lamp Cap Gauge | |
| 7006-27B-1 | “Go” gauge for E27 caps on finished lamps |
| 7006-27C-1 | “Go” gauge for dimension “S1” of E27 caps on finished lamps |
| 7006-28A-1 | “Not Go” gauge for E27 caps on finished lamps |
| 7006-50-1 | Gauge for finished lamps fitted with E27 caps for testing contact making |
| 7006-51-2 | Gauge for caps on finished lamps for testing protection against accidental contact |
| 7006-51A-2 | Gauge for caps on finished lamps for testing protection against accidental contact during insertion |
| E14 Lamp cap Gauge | |
| 7006-27F-1 | “Go” gauge for E14 caps on finished lamps |
| 7006-27G-1 | “Go” gauge for dimension “S1” of E14 caps on finished lamps |
| 7006-28B-1 | “Not Go” gauge for E14 caps on finished lamps |
| 7006-54-2 | Gauge for finished lamps fitted with E14 caps for testing contact making |
| 7006-55-2 | Gauge for finished lamps fitted with E14 caps for testing protection against accidental contact |
| E12 Lamp Cap Gauge | |
| 7006-27H-1 | “Go” gauge for caps on finished lamps |
| 7006-27J-1 | Additional “Go” gauge for caps on finished lamps |
| 7006-28C-1 | “Not Go” gauge for caps on finished lamps |
| 7006-32-1 | gauge for finished lamps fitted with E12 caps for testing contact-making |
| E26 lamp cap gauge | |
| 7006-27D-3 | “Go” gauge for caps |
| 7006-29L-4 | “Not Go” gauge for caps |
| 7006-29-3 | Gauge for testing contact-making of lamps fitted with caps |
| E17 Lamp Cap Gauge | |
| 7006-27K-1 | “Go” gauge for caps on finished lamps |
| 7006-28F-1 | “Not Go’ gauge for caps on finished lamps |
| 7006-26D-1 | Gauge for testing contact-making of lamps fitted with caps |
| E39 Lamp Cap gauge | |
| 7006-24A-1 | Gauge for finished lamps fitted with E39 caps for testing contact-making |
| 7006-24B-1 | “Go” gauge for caps on finished lamps |
| 7006-24C-1 | Gauge for testing contact-making of lamps fitted with caps |
| E40 Lamp Cap gauge | |
| 7006-27-7 | “Go” gauge for caps on finished lamps |
| 7006-28D-1 | “Not Go” Gauge for caps on finished lamps |
| 7006-52-1 | Gauge for finished lamps fitted with E40 caps for testing contact making |
| 7006-53-1 | Gauge for finished lamps fitted with E40 caps for testing protection against accidental contact |
| G13 Lamp Cap gauge | |
| 7006-44-4 | “Go” and “Not Go” gauge for unmounted Bi-Pin cap |
| 7006-45-4 | “Go” gauge for BI-Pin cap on finished lamps |
| GU10 Lamp Cap gauge | |
| 7006-121-1 | Go and Not Go Gauge for Bases |
| B22 & B22D Lamp Cap Gauge | |
| 7006-10-8 | Not Go Gauge for Caps on Finished Lamps |
| 7006-11-8 | Go gauge for Caps on Finished lamps BA9, B15, BA15 & B22 |
| 7006-4A-2 | Gauges for Testing the Insertion of Caps in lampholders B15d, B22d & BY22d |
| 7006-4B-1 | Gauges for Testing the Retention of B15d and B22d Caps in the Holder |
| 7006-3-1 | Acceptance Gauge for B22d Caps Intended for Automatic Wire Threading |
| 7006-17A-1 | Go Gauge for Cap on Finished Lamps BY22d |
| G5 Lamp Cap Gauge | |
| 7006-46-3 | Go and Not Go gauge for Unmounted BI-PIN Cap |
| 7006-46A-3 | “Go” Gauge for BI-PIN Cap on Finished Lamps |
| B22 Lamp Cap Gauge | |
| 7006-10-8 | Not Go Gauge for Caps on Finished Lamps |
| 7006-11-8 | Go gauge for Caps on Finished lamps BA9, B15, BA15 & B22 |
| 7006-4A-2 | Gauges for Testing the Insertion of Caps in lampholders B15d, B22d & BY22d |
| 7006-4B-1 | Gauges for Testing the Retention of B15d and B22d Caps in the Holder |
| 7006-3-1 | Acceptance Gauge for B22d Caps Intended for Automatic Wire Threading |
| 7006-17A-1 | Go Gauge for Cap on Finished Lamps BY22d |
| B15 Lamp Cap Gauge | |
| 7006-4A-2 | B15 Lamp Cap and holder GO and Not Go Gauges |
| 7006-4B-1 | Gauges for testing the retention of B15d and B22d caps in the holder |
| 7006-10-8 | Not Go gauges for caps on finished lamps BA9, B15, B22 and BY22d |
| 7006-11-8 | Go gauges for caps on finished lamps BA9, B15, BA15 and B22 |
| B15 Lampholder Gauge | |
| 7006-12C-2 | Supplementary “Go” Gauge for lampholders B15 |
| 7006-12D-2 | “Not Go”/Retention Gauge for Lampholders B15 |
| 7006-15B-1 | Gauges for Checking Contact Position and Contact Force in Bayonet Lampholders B15d |
Note: Please send us the figure number on the inquiry, all the gagues can pass the third-lab calibration and get the ceritificates autorized by CNAS (IS017025).
