Hand Operated EP-510 Hydraulic Press Tools Portable Hydraulic Hose Crimping Tool

EP-510 Hydraulic Press Tool Manual Hydraulic Hose Crimping Tool with 130KN Crimping Force

Hydraulic Cable Lug Crimping Tool With Safety Valve For Crimping Terminal 16-400sqmm

Application

Model EP-510 Handheld/Manual Hydraulic Press Crimping Tool is used to compress copper and aluminum terminals.The compression mould can be replaced and easy operation.Press tools is suitable for DIN,AWG,JIS.There is a safety protection device of "Kacha"voice when it reaches to the high voltage or low voltage.It can be used in working in the higher levels by one person.It saves time and labor.Pump is connected to the tools,the head of die-casting can be turned 180 degree.

Hydraulic Crimping Tools Type Copper Tube Crimper Tool

1. Crimping range is 16-400mm2

2. Die set, 50.70,95,120,150,185,240,400mm2

3. 200cc oild capacity

4. 38 mm stroke, with 130Kn crimping force

1. Design to accommodate hexagonal, dies of hydraulic tools for applying compression fittings too copper, aluminum conductors.

2. Two stage pumping action for rapid ram advance to the connector hold position with minimum pumping action.

3. Automatic retraction when the pressure of crimper tools reaches 700kg/cm2 reached.

4. The glass fiber operation insulates the stick, the crimping tool can bear the electric voltage 200KV, keeping on the minute.

5. Hydraulic tools with 180 degree rotatable head.

6. The pressure of the hydraulic tools outside the body adjusts to press the valve.