Home Companies Qingdao Hengfengyou Electrical Engineering Co., Ltd.

Low Voltage Metal Enclosed Switchgear Compensation Switchgear ISO9001

Qingdao Hengfengyou Electrical Engineering Co., Ltd.
Active Member

Contact Us

[China] country

Address: N0.506 Huicheng Road, Chengyang District, Qingdao City,China

Contact name:Jack

Inquir Now

Qingdao Hengfengyou Electrical Engineering Co., Ltd.

Low Voltage Metal Enclosed Switchgear Compensation Switchgear ISO9001

Country/Region china
City & Province qingdao shandong
Categories Other Chargers
InquireNow

Product Details

400V/600V MNS Type Low Voltage Electrical Switchgear Panel
 
Work Environment

1. Ambient air temperature: -5℃+40℃and the average temperature should not exceed +35℃ in 24h.
2. Air condition: With clean air. Relative humidity should not exceed 50% at +40℃. Higher relative humidity i
s allowed at lower temperature. Ex. 90% at +20℃. But in view of the temperature change, it is possible that
moderate dews will produce casually.
3. Altitude above sea level should not exceed 2000M.
4. The device is suitable to the transportation and store with following temperature:-25℃ ~+55℃, in short
time (within 24h) it reaches +70℃. Under the limiting temperature, device should not suffer damage that
can[1]t recover, and it can works normally under normal conditions.
5. If the above operating conditions not meet user’s demand. Consult with manufactory.
6. Technical agreement should be signed additionally if the device is used for marine petrol drill taken
platform and nuclear power station
 

Product Description

MNS LV withdrawable switchgear (hereinafter referred to as device) is manufactured by standard
module through consulting MNS series low voltage switch cabinet of Switzerland ABB Company,
and synthetically improved. The device is applicable to the system with AC 50Hz, rated working
voltage 660V and below, used as control device for various power generation, transmission, distribution
, power transfer and power consumption device. It is widely used in low voltage distribution system of
various mining enterprise, tall building and hotel, municipal construction etc. Besides the general land
use, after special disposal, it also can be used for marine petrol drill taken platform and nuclear power
station. The device accords with international standard IEC439-1 and national standard GB7251.1.

 

 

ItemData
Rated voltageto 660V
Ratd voltage impacte indurance8KV
Rated frequency50/60hz
Grounding systemTT,IT, TN-S,TN-C-S
Ratd voltage of auxiliary circuitAC380,220v/ DC220v
Maximum coil in and out broken circuit6300A
Pollution degree3
Rated current6300A
Horizontal busbar rated current4000A
Vertical busbar rated current2000A,1000A
Horizontal busbar ratd shorttime withstand current50/80KA
Horizontal busbar rated peak value withstand current105/176KA
Vertical busbar rated short time withstand current50KA
Vertical busbar rated peak value withstand current105KA


 

Hot Products

SC(B)type epoxy series casting dry type transformer Product description Our SC(B) series epoxy resin ...
Scbh15 Amorphous Metal Dry Type Transformer 10-0.4KV model 20-0.4KV model 35KV model 1.Transformer ...
SCB10/11 Non Encapsulated Dry Type Power Transformer 10kv (10.5/11/6/6.3/6.6) to 0.4/0.415/0.433kv ...
Dyn11 Yyn 06~10kv 30-2500kVA 3 Phase Dry Type Power Frequency Distribution Transformer SCB Dry Type ...
Cast Resin Dry Type Power Transformer 11kv SC(B)10 Series Resin Insulation Dry-type Transformer is ...
SCB13 international standard, phase copper winding cast resin dry-type power transformer 1. Safe, ...