Medium Frequency Induction Forging Equipment , Industrial Induction Heater 400KW

Medium Frequency Furnace Single Machine Power Up To 1000kW Medium Frequency Induction Furnace

Features of intermediate frequency furnace:

Since the principle of medium frequency induction heating is electromagnetic induction, its heat is generated in the workpiece itself. Ordinary workers can carry out continuous work of forging tasks within ten minutes after working with medium frequency electric furnace, and it is not necessary for professional workers to burn and seal the furnace in advance. Due to the fast heating speed of this heating method, there is little oxidation. The oxidation and burning loss of medium frequency heating forgings is only 0.5%, the oxidation and burning loss of gas furnace heating is 2%, and that of coal-fired furnace is 3%. The medium frequency heating process saves materials, and at least 20-50kg of steel raw materials are saved per ton of forgings compared with coal-fired furnace. The material utilization rate can reach 95%. Since the heating mode is uniform and the temperature difference between the core and the surface is extremely small, the service life of the forging die is greatly increased in forging, the roughness of the forging surface is less than 50um, and the process energy saving is 31.5% ~ 54.3% for medium frequency heating and specific gravity oil heating, and 5% ~ 40% for gas heating. The heating quality is good, the scrap rate can be reduced by 1.5%, the productivity can be increased by 10% ~ 30%, and the die life can be prolonged by 10% ~ 15%.

Technical parameters of intermediate frequency furnace

Model: LC-ZP-400

Power supply: three-phase four wire 380V 50-60Hz

Input power: 400KW

If range: 2.6khz

Load rate: 100%

Input power: 400A

Boundary dimension:700 * 1000 * 1550mm

Performance characteristics of intermediate frequency furnace:

1. The overall efficiency is high, and the overall efficiency can reach more than 85%

2. Due to the use of energy - saving super - good devices, the whole machine has a long life

3. Realize large capacity, single machine power can reach more than 200kW

4. The output power is easy to adjust, the reaction speed is fast, the control is accurate, and the heating conditions can be arbitrarily selected

5. Low failure rate, low working voltage (380V), high safety factor, convenient use, inspection and maintenance

6. With high reliability and unique circuit design, the adopted power module units constitute the system. Even if individual power module units are damaged, the equipment will not be interrupted, and the reliable operation of the equipment will be substantially improved

7. Simple structure, simple spare parts, small floor area and light weight

8. Energy saving: compared with the high frequency induction heating equipment with the same power level, it saves more than 50% electricity and 70% water